Sandvik Coromant 5723992 Turning Insert CNMG432-WF 5015

Product Description

The SANDVIK COROMANT 5723992 is a solid carbide turning insert in the CNMG432-WF geometry, part of the T-Max P series. It features an 80-degree diamond insert shape with a neutral hand orientation and an uncoated (bright) finish. The inscribed circle measures 0.5 inches (12.70 mm), the insert length is 0.4762 inches (12.10 mm), and the corner radius is 0.0313 inches (0.79 mm). Four cutting edges are available per insert. This insert is designed for external turning operations and is installed by machinists and CNC operators working on steel and cast iron workpieces in production turning applications.

The 5723992 insert is suited for turning steel (ISO material code P) as the primary workpiece material and cast iron (ISO material code K) as the secondary workpiece material. It is used in T-Max P toolholders that accept CNMG-style inserts. The WF chipbreaker geometry is optimized for finishing passes. Typical applications include shaft turning, facing, and light profiling on CNC lathes and turning centers in job shop and production environments. The insert is held in place using a clamp and pin holding method.

Key Features

• CNMG insert style with 80-degree diamond shape and neutral hand orientation
• Uncoated solid carbide substrate in manufacturer grade 5015
• WF chipbreaker geometry optimized for steel finishing operations
• Four usable cutting edges per insert for extended tool economy
• Wiper edge geometry for improved surface finish at higher feed rates
• ISO designation CNMG 12 04 08-WF 5015 for cross-reference and toolholder matching

Compatibility

Designed for use in T-Max P series toolholders accepting CNMG-style inserts with a clamp and pin holding method. Compatible with CNMG 432 insert seats. Verify toolholder seat geometry and clamping system before installation.

Installation Notes

Installation is performed by a qualified machinist or CNC operator. Always power down and lock out the machine before changing inserts. Use the appropriate torque wrench and clamp hardware specified by the toolholder manufacturer when securing the insert. Inspect the insert pocket and seating surfaces for chips or debris before seating a new insert to prevent premature edge failure.