Sandvik Coromant 5723922 Turning Insert Ccmt Carbide

Product Description

The SANDVIK COROMANT 5723922 is a solid carbide turning insert in the CCMT style, part of the CoroTurn 107 series. It features an 80-degree diamond insert shape with a neutral hand orientation, making it suitable for external turning and profiling operations on CNC and manual lathes. The insert carries the H13A uncoated carbide grade, a bright finish, and a KM chip breaker geometry designed to control chip flow during machining. Key dimensions include a 0.25-inch inscribed circle, a 0.2381-inch insert length, and a 1/64-inch (0.0156-inch) corner radius. Installation is performed by machinists and toolroom technicians using a screw-type clamping method.

This insert is best suited for machining cast iron and non-ferrous metals, making it a practical choice for automotive, aerospace, and general metalworking applications. The uncoated H13A carbide grade performs well at moderate cutting speeds and is particularly effective when surface finish and dimensional accuracy are priorities. The KM chip breaker geometry helps manage chip evacuation on lighter cuts typical in finishing and semi-finishing passes. The screw-on retention method is compatible with standard CoroTurn 107 toolholders that accept CCMT-style inserts with a 2.80 mm hole diameter.

Key Features

• CCMT insert style with 80-degree diamond shape and neutral hand orientation
• H13A uncoated solid carbide grade with bright finish for cast iron and non-ferrous applications
• KM chip breaker geometry for controlled chip evacuation on finishing and semi-finishing cuts
• 1/64-inch corner radius (0.0156 inches) for precision surface finish requirements
• Screw-type insert holding method for secure seating in compatible toolholders
• 2 cutting edges per insert

Compatibility

Designed for use with CoroTurn 107 series toolholders that accept CCMT-style inserts. ISO code CCMT 06 02 04-KM H13A. Primary workpiece material is cast iron (ISO code K); secondary workpiece material is non-ferrous metal (ISO code N). Compatible toolholders must accept a 2.80 mm (0.1102-inch) hole diameter screw clamp insert.

Installation Notes

Insert installation and replacement should be performed by a qualified machinist or toolroom technician with the machine powered off and the spindle fully stopped. Use the appropriate Torx or hex key to seat the clamping screw to the toolholder manufacturer's specified torque. Inspect the insert pocket and clamping screw for wear or debris before seating a new insert. Follow all applicable machine shop safety procedures and the toolholder manufacturer's guidelines when indexing or replacing cutting inserts.