Sandvik Coromant 5723605 Turning Insert Carbide Ccmt

Product Description

The SANDVIK COROMANT 5723605 is a solid carbide turning insert designed for precision external turning operations in CNC and manual lathe applications. Manufactured to the CCMT insert style with an 80-degree diamond shape, it features a neutral hand orientation and a PF chip breaker geometry optimized for finishing cuts on steel and cast iron. The insert carries grade 5015, an uncoated bright carbide grade suited for light to moderate cutting conditions. It measures 0.365 inches in length with a 3/8-inch inscribed circle and a 1/64-inch corner radius, providing a tight tolerance fit in standard CCMT toolholders.

This insert is intended for use in CoroTurn 107 series toolholders and is suited for both production and job-shop turning environments. Primary workpiece materials are steel (ISO P) and cast iron (ISO K). It is commonly installed in turning centers, CNC lathes, and engine lathes where consistent dimensional accuracy and surface finish on ferrous materials are required. The 2-cutting-edge design allows the insert to be indexed once to maximize tool life before replacement. Each package contains 1 insert with a minimum order quantity of 10 units.

Key Features

• 80-degree diamond insert shape (CCMT style) for versatile external turning
• Grade 5015 uncoated bright carbide for finishing on steel and cast iron
• PF chip breaker geometry designed for controlled chip flow in finishing applications
• 2 cutting edges per insert for extended tool life through indexing
• Screw-lock insert holding method for secure, repeatable seating in the toolholder
• Neutral hand orientation compatible with standard CCMT toolholder pockets

Compatibility

Designed for use with CoroTurn 107 series toolholders accepting CCMT 09 T3 04 inserts with screw-lock clamping. Verify toolholder pocket tolerance and clearance codes before installation.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician. Power down and lock out the machine spindle before changing inserts. Use the appropriate Torx or hex key to secure the clamping screw to the toolholder manufacturer's recommended procedure without overtightening, which can crack the insert. Inspect the toolholder pocket and seating surfaces for debris or wear before seating a new insert.