Sandvik Coromant 5723197 Turning Insert 80 Diamond Coroturn 107

Product Description

The SANDVIK COROMANT 5723197 is a solid carbide, uncoated turning insert in the CCGX 12 04 08-AL H10 ISO designation, part of the CoroTurn 107 series. It features an 80-degree diamond insert shape (Shape Code C) with a neutral hand orientation and a 7-degree relief angle (Clearance Code C). The inscribed circle measures 0.5 inches (12.70 mm), the insert length is 0.4762 inches (12.10 mm), and the insert thickness is 0.1875 inches (4.76 mm). The corner radius is 0.0313 inches (0.79 mm). The AL chip breaker geometry and H10 carbide grade are optimized for cutting non-ferrous metals, making this insert a reliable choice for aluminum and similar workpiece materials in production turning applications.

This insert is designed for turning non-ferrous metals as the primary workpiece material, with secondary suitability for superalloys and titanium. It fits CoroTurn 107 toolholders that accept the CCGX 432 insert format with a screw-holding method. Typical use cases include finish and semi-finish turning of aluminum components in both light manufacturing and high-production CNC environments. The uncoated, bright carbide surface reduces built-up edge on soft, gummy non-ferrous materials. Licensed machinists and CNC operators working on lathes and turning centers are the primary installers and users of this insert.

Key Features

• Solid carbide, uncoated (bright) substrate - H10 grade optimized for non-ferrous and superalloy cutting
• 80-degree diamond insert shape with 7-degree relief angle for positive cutting geometry
• AL chip breaker designed for free-cutting action on aluminum and non-ferrous workpieces
• Screw-holding mount (CCGX style) for secure, repeatable seating in CoroTurn 107 toolholders
• 2 cutting edges per insert
• Tolerance Code G and Clearance Code C for dimensional consistency and fit

Compatibility

Designed for use with CoroTurn 107 series toolholders accepting the CCGX 432 insert format. ISO code CCGX 12 04 08-AL H10. Suited for non-ferrous metals (Material Code N) as the primary workpiece material and superalloys and titanium (Material Code S) as secondary workpiece materials.

Installation Notes

Insert replacement and indexing should be performed by a qualified machinist or CNC operator with the machine powered down and the spindle fully stopped before handling cutting inserts. Use the appropriate Torx or hex key as specified by the toolholder manufacturer when tightening the clamping screw - do not overtighten, as this can fracture the carbide. Inspect the toolholder pocket and seating surfaces for chips or debris before seating the insert. Handle carbide inserts with care, as the cutting edges are brittle and can chip if contacted with hard surfaces.