Sakrete 65450053 Repair Mortar 3 Lb Tuckpointing

Product Description

The SAKRETE OF NORTH AMERICA 65450053 is a pre-mixed repair mortar formulated for patching and tuckpointing deteriorated mortar joints and masonry surfaces. Packaged in a 3-pound bag, it covers small to medium repair areas without requiring a mixing vessel or separate tools — water is added directly to the bag and mixed in place. The result is a consistent mortar suitable for use on chimneys, brick walls, concrete block, and similar masonry assemblies. Masonry contractors, tile setters, and experienced maintenance trades will find this a practical single-bag solution for job-site or service-call repairs where mixing equipment is not available.

This product is suited for residential and light commercial masonry repair work. Common applications include tuckpointing worn or cracked mortar joints on chimney crowns and fireboxes, patching spalled mortar on brick veneer walls, and filling voids in concrete or block construction. The compact 3-pound unit is practical for service calls where only a small repair area is involved, reducing waste compared to larger bag sizes.

Key Features

• Mix-in-the-bag design requires no bucket, paddle, or mixer — add water and work directly from the bag
• Suitable for tuckpointing worn or damaged mortar joints on chimneys and brick walls
• Compatible with concrete, masonry block, and similar substrates
• 3-pound package size limits waste on small patch and repair jobs
• Packaged 12 units per case for trade stocking or multi-job supply

Compatibility

Designed as a general-purpose repair mortar for use on chimneys, brick walls, concrete, and similar masonry surfaces where patching or tuckpointing of existing mortar joints is required.

Installation Notes

Application should be performed by a qualified masonry contractor or experienced tradesperson following applicable building codes. Remove all loose, deteriorated mortar to a minimum sound depth before applying fresh material, and dampen the substrate to reduce suction prior to placement. Do not apply when ambient or surface temperatures are below 40 degrees F or when freezing conditions are expected within 24 hours of application. Cure per product directions before exposing the repair to water or load.