Safety Technology Int'l SS2142LD-EN Green Illuminated Stopper Station

Product Description

The Safety Technology Int'l Inc SS2142LD-EN is a green illuminated stopper station designed for use as a manual pull station in fire alarm and emergency notification systems. This unit features green illumination to provide clear visual identification at the device location. Stopper stations of this type are used to initiate manual alarm signals and are typically installed by licensed fire alarm technicians or licensed electricians in compliance with applicable life safety codes. The SS2142LD-EN is sold as a single unit and is suited for installations requiring a clearly visible, illuminated activation point.

This stopper station is intended for use in commercial and light industrial environments where manual alarm initiation points are required. It is mounted at accessible locations along egress paths, corridors, and exit routes in accordance with NFPA 72 and local fire alarm codes. Installation is typically performed during new construction or system retrofit projects by fire alarm system contractors. The green illumination aids in locating the device under low-light or emergency conditions.

Key Features

• Green illumination for high-visibility identification of the pull station location
• Manual stopper station design for direct emergency alarm activation
• Single-unit packaging for straightforward inventory and installation management
• Designed to integrate with fire alarm and emergency notification system pull station circuits

Compatibility

Designed as an OEM-style replacement or new-installation pull station compatible with standard manual pull station wiring circuits in commercial fire alarm systems. No specific compatible model numbers were provided in the product data.

Installation Notes

Installation of manual pull stations must be performed by a licensed fire alarm technician or qualified electrician in accordance with NFPA 72 and all applicable local codes. Deenergize the fire alarm control panel circuit before wiring or replacing any pull station device. Mount the device at the code-required height above the finished floor along the egress path and verify proper operation with a full system test after installation.