Rust-oleum V2116838 High Heat Spray Paint Aluminum Gloss

Product Description

The RUST-OLEUM V2116838 is a high-heat aerosol spray paint formulated for metal surfaces that are exposed to extreme temperatures. It delivers a gloss aluminum finish and is rated to withstand continuous heat up to 1,000 degrees F. The 15 oz aerosol can covers 12 to 20 square feet per application. Tack-free dry time is 15 minutes, making it practical for service work where downtime needs to be limited. Licensed HVAC technicians, boiler service pros, and plumbers use this coating to restore and protect high-temperature metal components on the job.

This paint is designed for outdoor application on boilers, steam pipes, kilns, vents, and exhaust pipes. The aluminum gloss finish provides maximum corrosion protection on bare and painted metal surfaces exposed to high heat cycles. Application temperature must be between 50 and 100 degrees F. It is not rated for indoor use. Typical installation scenarios include recoating boiler jackets, exhaust stack sections, vent connectors, and other metal components that routinely reach elevated operating temperatures.

Key Features

• Withstands continuous temperatures up to 1,000 degrees F
• Gloss aluminum finish with maximum corrosion protection
• Tack-free in 15 minutes for faster return to service
• Covers 12 to 20 square feet per 15 oz can
• Aerosol delivery for even, no-brush application on irregular surfaces
• Rated for boilers, steam pipes, kilns, vents, and exhaust pipes

Compatibility

Designed for use on metal surfaces including boilers, steam pipes, kilns, vents, and exhaust pipes that are subject to high heat. Apply only to surfaces where the ambient temperature during application is between 50 and 100 degrees F.

Installation Notes

Surface preparation is critical — remove loose rust, scale, grease, and old paint before applying. Apply outdoors only, in dry conditions within the stated temperature range. Shake the can thoroughly before use and maintain a consistent spray distance for uniform coverage. Allow adequate cure time before exposing the coated surface to operating heat.