Rust-oleum S6586413 Epoxy Coating High Gloss Gray 1 Gal

Product Description

The RUST-OLEUM S6586413 is a solvent-based epoxy protective coating engineered for demanding surface applications. It delivers a high-gloss gray finish with strong resistance to chemicals, abrasion, and impact. Formulated at 100 grams per liter VOC, it qualifies as a low-VOC product suitable for outdoor use. Coverage ranges from 100 to 300 square feet per gallon depending on surface porosity and application method. This coating is a two-component system that must be used with a separate activator (MSC Item 00243261) and is intended for installation by experienced coating applicators, flooring contractors, or maintenance professionals working on industrial or commercial surfaces.

This epoxy coating is designed for outdoor concrete surfaces including garage floors, warehouse floors, loading docks, and similar high-traffic areas. Its impact-resistant and chemical-resistant properties make it well suited to environments where spills, foot traffic, or wheeled equipment are routine. The low-odor formula reduces ventilation requirements compared to standard solvent-based coatings, though adequate airflow should still be maintained. Application temperature must fall between 60 degrees F and 90 degrees F for proper cure and adhesion.

Key Features

• Solvent-based epoxy formula with high-gloss gray finish for durable surface protection
• Chemical-resistant, abrasion-resistant, and impact-resistant cured film
• Low VOC content at 100 grams per liter with low-odor formulation
• Coverage of 100 to 300 square feet per gallon depending on substrate condition
• Touch dry in 10 hours, light traffic ready in 10 hours, recoat at 24 hours, full cure at 72 hours
• Two-component system requiring activator MSC Item 00243261 before use

Compatibility

Designed for application on concrete surfaces in outdoor settings. Must be paired with activator MSC Item 00243261 as specified by the manufacturer. Not intended for use without the required activator component.

Installation Notes

Surface preparation is critical for epoxy coating adhesion — concrete must be clean, dry, and free of oil, grease, and existing coatings before application. Mix the coating with the required activator per manufacturer instructions before application; do not apply unmixed material. Apply only when ambient and surface temperatures are between 60 degrees F and 90 degrees F. Allow full 72-hour cure time before exposing the surface to heavy traffic or chemical contact.