Rust-oleum S6582413 Epoxy Coating 1 Gal High Gloss Gray

Product Description

The RUST-OLEUM S6582413 is a solvent-based epoxy protective coating formulated for demanding surfaces that require durable, long-lasting protection. Packaged in a 1-gallon can, this high-gloss, gray silver coating is designed for outdoor concrete applications where chemical resistance, abrasion resistance, and impact resistance are required. With a VOC content of 100 grams per liter and a low-odor formula, it suits job sites where ventilation is limited. Coverage ranges from 100 to 300 square feet per gallon depending on surface porosity and application method. Licensed coating applicators, flooring contractors, and facilities maintenance professionals are the primary installers.

This epoxy coating is intended for outdoor concrete surfaces including driveways, garage floors, warehouse slabs, loading docks, and similar hard-use horizontal surfaces. Its solvent-based composition provides strong adhesion to properly prepared concrete. Application is appropriate when ambient and surface temperatures fall between 60 degrees F and 90 degrees F. The product is suited to both commercial and residential settings where a chemical-resistant, high-traffic-capable surface finish is needed.

Key Features

• Solvent-based epoxy formula delivers chemical, abrasion, and impact resistance
• High-gloss finish in gray silver for professional appearance on concrete floors
• Low VOC content at 100 grams per liter with low-odor formulation
• Coverage of 100 to 300 square feet per gallon depending on surface condition
• Touch dry in 10 hours, light traffic ready in 10 hours, full cure in 72 hours
• Applicable to concrete surfaces in outdoor environments

Compatibility

Designed for use on concrete surfaces in outdoor applications. Suitable for horizontal slabs and floors requiring a durable epoxy topcoat finish.

Installation Notes

Surface preparation is critical before applying any epoxy coating — concrete must be clean, dry, and free of oil, grease, and existing coatings that may prevent adhesion. Apply only when air and surface temperatures are between 60 and 90 degrees F and conditions are not expected to change during the drying window. Allow a minimum recoat time of 24 hours between coats and a full cure time of 72 hours before heavy use. Follow all applicable local VOC regulations and ventilation requirements during and after application.