Rust-oleum S6571413 Epoxy Coating 1 Gal High Gloss Brown

Product Description

The RUST-OLEUM S6571413 is a solvent-based epoxy protective coating formulated for concrete surfaces that demand durability under heavy use. Packaged in a 1-gallon can, it delivers a high-gloss brown finish with coverage ranging from 100 to 300 square feet per gallon depending on surface porosity and application method. The coating achieves light traffic readiness in 10 hours and full cure in 72 hours. With a VOC content of 100 grams per liter, it qualifies as a low-VOC formulation. Licensed contractors, flooring installers, and maintenance crews apply this product in commercial and industrial settings where floor protection is a priority.

This coating is designed for outdoor concrete applications where resistance to chemicals, abrasion, and impact is required. Typical use cases include warehouse floors, loading docks, garage slabs, and exterior concrete pads. Application is limited to ambient temperatures between 60 degrees F and 90 degrees F, making it suitable for most temperate job-site conditions. The low-odor formula reduces disruption in occupied or semi-occupied spaces during application and recoat cycles.

Key Features

• Solvent-based epoxy formula provides chemical resistance, abrasion resistance, and impact resistance
• High-gloss brown finish suited for concrete floors and slabs
• Light traffic ready in 10 hours; full cure in 72 hours
• 100 grams per liter VOC content — low-VOC, low-odor formulation
• Coverage of 100 to 300 square feet per gallon depending on surface condition
• Application temperature range: 60 degrees F to 90 degrees F

Compatibility

Designed for use on concrete surfaces in outdoor settings. No specific compatible system or model data was provided in the product input.

Installation Notes

Surface preparation is critical — concrete must be clean, dry, and free of oils, grease, and previous coatings before application. Follow manufacturer mixing instructions for epoxy components and apply using a brush, roller, or sprayer appropriate for solvent-based coatings. Allow a minimum of 24 hours recoat time before applying a second coat. Ensure adequate ventilation during application and curing in accordance with applicable safety and building codes.