Rust-oleum A910008300 Epoxy Mastic Fast Cure Activator 5 Gal

Product Description

The RUST-OLEUM A910008300 is the Fast Cure Activator for the Rust-Oleum 9100 System DTM Epoxy Mastic, sold in a 5 gallon container. This two-component activator mixes with the 9100 base coat at a 1:1 ratio to produce a tough, chemical-resistant epoxy film designed for direct-to-metal and multi-substrate applications. The fast cure formulation cuts recoat time to 4 hours at 70 degrees F and 50 percent relative humidity, reducing downtime on active job sites. Licensed coating contractors and industrial painters apply this product where schedule and surface protection are both critical. The finished coating delivers long-term resistance to solvents, chemicals, abrasion, and impact. Package weight is 50 pounds.

This activator is intended for use in industrial and commercial coating projects where the 9100 System DTM Epoxy Mastic base coat is specified. It is suited for air and surface temperatures ranging from 50 to 100 degrees F. Typical applications include structural steel, fabricated metal components, and other substrates requiring a high-performance protective epoxy finish. The fast cure version produces slightly lower gloss than the standard activator. The 9100 system also meets USDA requirements for incidental food contact and is accepted for use in federally registered Canadian food facilities, making it appropriate for food processing environments when applied per system guidelines.

Key Features

• Fast Cure formulation allows recoat in 4 hours at 70 degrees F and 50 percent relative humidity
• 1:1 mix ratio with 9100 base coat — no measuring equipment required
• Suitable for air and surface temperatures of 50 to 100 degrees F
• Produces a hard, durable film with superior resistance to solvents, chemicals, abrasion, and impact
• Meets USDA requirements for incidental food contact; accepted for federally registered Canadian food facilities
• Less than 340 VOCs

Compatibility

Designed for use with the Rust-Oleum 9100 System DTM Epoxy Mastic base coat as part of a two-component coating system. Order base color and activator separately.

Installation Notes

Application should be performed by qualified coating contractors or industrial painters familiar with two-component epoxy systems. Ensure all power or process equipment in the work area is shut down and surfaces are clean, dry, and properly prepared before mixing. Mix only what can be applied within the pot life window and do not thin beyond product guidelines. Follow applicable safety data sheet requirements and local VOC regulations when applying in enclosed or regulated spaces.

Technical Specifications

• Activator Type: Fast Cure
• Recoat Time: 4 hours at 70 degrees F and 50 percent relative humidity
• Application Temperature Range: 50 to 100 degrees F
• Mix Ratio: 1:1 with 9100 base coat
• VOC Content: Less than 340
• Container Size: 5 gallons
• Package Weight: 50 pounds
• UPC: 020066007010

Standard Information

• Brand: RUST-OLEUM
• Manufacturer Part Number: A910008300