Rust-oleum 944402 Industrial Enamel Paint 1 Gal Safety Yellow

Product Description

The RUST-OLEUM 944402 is a solvent-based industrial enamel paint formulated for rust prevention on metal and steel surfaces. Supplied in a 1-gallon can, this Safety Yellow gloss finish coating applies directly to metal without a primer in most applications. Coverage ranges from 255 to 435 square feet per gallon depending on surface porosity and application method. With a tack-free dry time of 4 hours and a full cure at 7 hours, it is suited for maintenance and production environments where downtime must be controlled. Licensed painters, maintenance technicians, and industrial coating crews are the primary installers.

This coating is rated for both indoor and outdoor use across a working temperature range of 32 degrees F to 100 degrees F. It is commonly applied to structural steel, equipment frames, machinery housings, safety markings, and facility infrastructure where OSHA Safety Yellow color coding is required. The solvent-based composition provides a hard, gloss film that resists moisture and corrosion on ferrous metal substrates. Recoat time is 24 hours, so multi-coat jobs should be scheduled accordingly.

Key Features

• Direct-to-metal application on steel surfaces without a separate primer coat
• Coverage of 255 to 435 square feet per gallon depending on substrate and method
• Tack-free in 4 hours, fully dry in 7 hours for fast return to service
• OSHA Safety Yellow gloss finish for equipment and safety marking applications
• Rated for indoor and outdoor use from 32 degrees F to 100 degrees F
• Solvent-based, rust-preventative formula with 450 g/L VOC content

Compatibility

Designed as an OEM-style industrial coating for use on steel and metal surfaces requiring rust-preventative enamel in interior and exterior maintenance or production environments.

Installation Notes

Application should be performed by experienced painters or maintenance technicians familiar with solvent-based coatings and applicable safety regulations. Ensure the substrate is clean, dry, and free of loose rust, grease, and scale before application. Work only within the rated temperature range of 32 degrees F to 100 degrees F and provide adequate ventilation when applying indoors. Review local VOC regulations before use, as the 450 g/L VOC content may be subject to area restrictions.