Rust-oleum 9133402 Dtm Epoxy Mastic 1 Gal Safety Green

Product Description

The RUST-OLEUM 9133402 is a two-component, direct-to-metal (DTM) epoxy mastic coating in Safety Green gloss finish, sold in a 1-gallon container. It is designed for industrial and commercial applications where long-term corrosion protection, chemical resistance, and abrasion resistance are required. A single coat delivers protection comparable to multiple coats of standard competitive epoxies. The formula is self-priming and bonds to a variety of substrates without a separate primer coat. Mixing is straightforward at a 1:1 ratio by volume, eliminating the need for measuring equipment on the job site. Industrial painters, maintenance crews, and coating contractors are the primary installers.

This coating is suited for steel structures, concrete floors, equipment surfaces, and other substrates in industrial, food processing, and commercial maintenance environments. It meets USDA requirements for incidental food contact and is accepted for use in federally registered Canadian food facilities, making it appropriate for food and beverage facility maintenance work. Multiple activator options allow the product to be applied across a range of temperature conditions and end-use scenarios, including fresh and salt water immersion service and low-temperature application windows. It is well suited to floor-coating applications where durability and chemical resistance are priorities.

Key Features

• Direct-to-metal, self-priming formula adheres without a separate primer coat
• 1:1 mix ratio by volume — no measuring equipment required
• Superior resistance to solvents, chemicals, abrasion, and impact
• Two-year rust-proof guarantee for maximum corrosion protection
• Meets USDA incidental food contact requirements; accepted in federally registered Canadian food facilities
• Multiple activator options: Standard, Immersion, Low-Temperature, and Fast-Cure
• Fast-Cure Activator option allows recoat in 4 hours at 70 degrees F and 50% relative humidity

Compatibility

Compatible with multiple RUST-OLEUM 9100 System activators including Standard Activator (air and surface temps of 50-100 degrees F), Immersion Activator (fresh or salt water immersion of steel or concrete where water temps do not exceed 125 degrees F), Low-Temperature Activator (air and surface temps of 40-60 degrees F), and Fast-Cure Activator (air and surface temps of 50-100 degrees F). Base color and activator must be ordered separately. Not for use in potable water tanks.

Installation Notes

This is a two-component epoxy system — mix base and activator thoroughly in the correct 1:1 ratio before application and observe the product pot life for the selected activator. Industrial painters and maintenance coating crews should ensure surface temperatures and ambient conditions fall within the selected activator range prior to application. Surface preparation, including cleaning and removal of loose mill scale, rust, or contamination, is critical to adhesion and long-term performance. Follow applicable facility safety requirements and local VOC regulations, noting the product is formulated at less than 340 VOCs.

Technical Specifications

• Color: Safety Green
• Finish: Gloss
• Container Size: 1 gallon
• Mix Ratio: 1:1
• VOC Content: Less than 340
• Fast-Cure Recoat Time: 4 hours at 70 degrees F and 50% relative humidity
• Standard Activator Temp Range: 50-100 degrees F
• Low-Temperature Activator Range: 40-60 degrees F
• Immersion Activator Max Water Temp: 125 degrees F
• Weight: 12.37 pounds
• UPC: 020066913397

Standard Information

• Brand: RUST-OLEUM
• Manufacturer Part Number: 9133402