Rust-oleum 9103402 Low Temperature Activator 1 Gallon

Product Description

The RUST-OLEUM 9103402 is a low temperature activator supplied in a 1-gallon can for use with compatible RUST-OLEUM coating systems. It functions as a curing agent that promotes proper film formation and adhesion when application conditions fall outside the range suited to standard activators. Coverage runs 125 to 200 square feet per gallon depending on surface porosity and application method. VOC content is below 250 g/L. Dry time is 26 hours. Painting contractors, industrial maintenance crews, and coating applicators working in cooler ambient conditions rely on this activator to maintain coating integrity and performance.

This activator is formulated for use in environments where temperatures are lower than those recommended for standard activators. It is suited to industrial and commercial maintenance coating projects where conditions must still meet proper cure requirements. The 1-gallon container size is appropriate for moderate-scale jobs or for field crews maintaining project-ready inventory. It ships as a single unit with a minimum order quantity of one.

Key Features

• Low temperature formulation maintains proper cure in cooler application conditions
• Coverage of 125 to 200 square feet per gallon depending on substrate and application method
• VOC content below 250 g/L
• 26-hour dry time at rated conditions
• Supplied in a 1-gallon metal can for easy field use and storage
• Single-unit packaging with no minimum order beyond one unit

Compatibility

Designated for use with the following part numbers as specified by the manufacturer: 00243329, 00243345, 00243360, 46923116, 07144959, 00243303, 84569482, 00243485, 07836745, 37692209, 55573976, 00243386, 94120177, and 00243287.

Installation Notes

Mixing and application of catalyzed coatings should be performed by experienced painting contractors or industrial coating applicators familiar with two-component systems. Always review the corresponding product data sheet for the base coat before mixing to confirm the correct activator ratio. Ensure adequate ventilation in the work area and follow all applicable safety regulations for solvent-borne coatings. Do not mix more material than can be applied within the stated pot life of the coating system.