Rust-oleum 906402 Industrial Enamel Paint 10 Gal Gloss Silver Gray

Product Description

The RUST-OLEUM 906402 is a solvent-based industrial enamel paint formulated for rust preventative coating on steel and other metal surfaces. This 10-gallon can delivers a gloss finish in Silver Gray and is rated for direct-to-metal application without a primer coat. Coverage ranges from 255 to 435 square feet per gallon depending on surface condition and application method. VOC content is 450 g/L, placing it in the higher-solvent category — appropriate PPE and ventilation practices apply. Tack-free time is 4 hours, with full cure reached at 7 hours. Designed for contractors, maintenance crews, and industrial painters working on structural steel, equipment, and facility surfaces.

This enamel is rated for both indoor and outdoor use, making it suited for maintenance painting of industrial equipment, steel structures, machinery housings, and facility infrastructure. Application temperature must fall between 32 degrees F and 100 degrees F for proper adhesion and film formation. The solvent-based formula penetrates surface oxidation and bonds directly to bare metal, making it a common choice in industrial maintenance painting programs where long-term rust inhibition is the primary concern.

Key Features

• Direct-to-metal application — no primer required on prepared steel surfaces
• Gloss finish in Silver Gray suitable for equipment and structural steel
• Coverage: 255 to 435 square feet per gallon
• Tack-free in 4 hours, fully dry in 7 hours, recoat window opens at 24 hours
• Rated for indoor and outdoor environments
• Solvent-based, 450 g/L VOC — use with appropriate ventilation and respirator protection

Compatibility

Designed as a rust preventative enamel for direct application to steel and metal surfaces in industrial, commercial, and maintenance settings.

Installation Notes

Applied by professional painters, maintenance technicians, and industrial coating contractors. Surface must be clean, dry, and free of loose rust, oil, and mill scale before application. Ensure adequate ventilation when using indoors — solvent-based coatings at 450 g/L VOC require respiratory protection per OSHA and local safety guidelines. Do not apply outside the 32 degrees F to 100 degrees F temperature range, as adhesion and dry times will be adversely affected.