Rust-oleum 7791-730 Satin Enamel Paint White 0.5 Pint

Product Description

The RUST-OLEUM 7791-730 is a white satin enamel paint supplied in a 0.5-pint container with a VOC-compliant formula. Satin enamel finishes deliver a low-sheen, durable surface that resists moisture, stains, and everyday wear. This product is suited for interior and exterior applications where a clean, washable finish is required. Tradespeople and maintenance professionals use satin enamel on trim, doors, cabinets, metal surfaces, and other high-contact areas where a flat finish would not hold up. The VOC-compliant formulation supports use in environmentally regulated job sites and commercial buildings with indoor air quality requirements.

This paint is appropriate for residential and light commercial maintenance work, touch-up applications, and small-area refinishing projects. The 0.5-pint size is practical for spot repairs, contractor touch-up kits, and service calls where carrying a full quart is unnecessary. Painters, maintenance technicians, and general contractors working on trim, millwork, or metal fixtures are the typical installers. The satin sheen level sits between flat and semi-gloss, making it a common choice for walls and trim in commercial corridors, utility rooms, and mechanical spaces.

Key Features

• VOC-compliant formula suitable for regulated job sites and indoor commercial environments
• Satin finish provides low-sheen durability with a washable, moisture-resistant surface
• White colorway covers trim, doors, cabinets, and metal surfaces cleanly in fewer coats
• 0.5-pint container size is practical for touch-up work, spot repairs, and service kits
• Sold in a package quantity of 6 units per case for stocking and resale efficiency

Compatibility

Designed as an enamel topcoat for properly primed or previously painted wood, metal, and masonry surfaces in residential and light commercial applications.

Installation Notes

Application should be performed by a painter or qualified maintenance technician following the manufacturer surface-preparation guidelines. Surface must be clean, dry, and free of loose paint, grease, and rust before application. Ensure adequate ventilation during application and drying, particularly in enclosed mechanical or utility spaces. Consult local VOC regulations and building codes before use on regulated commercial projects.