Rust-oleum 387391 Enamel Spray Paint Red 10 Oz

Product Description

The RUST-OLEUM 387391 is a general purpose alkyd enamel spray paint in a gloss red finish, designed for fast, even coverage across a wide range of paintable surfaces. Packaged in a 10 oz upright aerosol can, it delivers a smooth, no-texture coat with a maximum wet film thickness of 3 mils and a dry film thickness of up to 2 mils. Solvent-based with an alkyd enamel resin, the formula is rated for both interior and exterior use. It is suited for trade and maintenance applications where a durable, heat-resistant finish is required. Coverage runs approximately 2 to 4 square feet per can depending on surface porosity and application technique.

This enamel spray is intended for general maintenance painting on aluminum, concrete, iron, metal, steel, and wood surfaces. It performs in both indoor and outdoor environments, making it practical for HVAC enclosures, conduit, pipe hangers, structural steel, and similar trade applications. Application temperature must remain between 50 degrees F and 90 degrees F for proper adhesion and film formation. The formula resists dry heat up to 200 degrees F, which is relevant for surfaces near heat-generating equipment.

Key Features

• Alkyd enamel resin provides a hard, gloss finish suitable for high-contact surfaces
• Heat resistant up to 200 degrees F for use near warm equipment or mechanical spaces
• Dries to touch in 2 hours with recoat window within 1 hour or after 48 hours
• Compatible with aluminum, concrete, iron, metal, steel, and wood substrates
• Upright aerosol dispensing for consistent spray pattern and ease of use
• 5-year shelf life when stored properly

Compatibility

Designed for use on aluminum, concrete, iron, metal, steel, and wood. Suitable for any paintable material indoors or outdoors. Not formulated for surfaces requiring a premium or high-build coating.

Installation Notes

Surface preparation is critical — remove loose rust, scale, grease, and moisture before application. Apply only when ambient and surface temperatures are between 50 degrees F and 90 degrees F. Shake the can thoroughly before use and maintain the recommended spray distance to avoid runs or uneven film buildup. This product is flammable; keep away from open flames, sparks, and energized electrical equipment during application and until the coating is fully cured.