Rust-oleum 360142 Ultrawear 1K Floor Coating 1 Gallon

Product Description

The RUST-OLEUM 360142 is a single-component, moisture-cure gloss topcoat designed for high-traffic decorative and functional flooring applications. It uses a proprietary non-isocyanate aliphatic chemistry that delivers UV resistance, chemical resistance, abrasion resistance, and scratch resistance in one ready-to-use formulation. Coverage runs approximately 400 square feet per gallon applied at roughly 4 mils wet film thickness using a 1/4-inch lint-free roller. Full return to service occurs in as little as 4 hours at 75 degrees F and 50 percent relative humidity, making it well suited for installations where downtime must be minimized.

This coating is intended for commercial, institutional, and industrial flooring environments where floors face heavy foot traffic, wheeled equipment, and exposure to harsh chemicals. Typical applications include warehouse floors, institutional corridors, manufacturing facilities, and other hard-surface floor systems requiring a durable clear gloss protective layer. The single-component format eliminates mix-ratio errors and simplifies consistency across large or multi-zone installations.

Key Features

• Non-isocyanate moisture-cure technology — no mixing or pot-life concerns
• Reported 3x greater scratch and mar resistance compared to polyaspartic topcoats
• Fast return to service: 4 hours at 75 degrees F and 50 percent RH
• Excellent UV stability from proprietary aliphatic chemistry — resists yellowing
• High solids, VOC-compliant formulation
• Applies at approximately 4 mils wet film thickness, approximately 400 square feet per gallon

Compatibility

Designed as a clear gloss protective topcoat for properly prepared concrete flooring surfaces in commercial, institutional, and industrial settings. Surface must be clean, dry, and free of all oils, greases, and contaminants prior to application.

Installation Notes

Application is typically performed by flooring contractors or experienced maintenance trades familiar with floor coating systems. Concrete surfaces must be fully profiled, clean, and dry before topcoat application — refer to applicable surface preparation standards for guidance. Apply using a 1/4-inch lint-free roller; do not apply over unprepared or contaminated substrates. Ensure adequate ventilation during and after application per local safety and building codes.

Technical Specifications

• Finish: Clear Gloss
• Container Size: 1 gallon
• Coverage Rate: Approximately 400 square feet per gallon at 4 mils wet film thickness
• Application Method: 1/4-inch lint-free roller
• Return to Service: 4 hours at 75 degrees F and 50 percent RH
• Components: Single component (1K), ready to use
• Weight: 9 pounds
• UPC: 020066469016

Standard Information

• Brand: RUST-OLEUM
• Manufacturer Part Number: 360142