Rust-oleum 340652 Dtm Acrylic Enamel 1 Gal Light Base Satin

Product Description

The RUST-OLEUM 340652 is a water-based, direct-to-metal (DTM) acrylic enamel coating in a light base, satin finish. It is formulated for fast application with no primer required, delivering excellent corrosion resistance on bare metal surfaces in a single coat. The coating dries to the touch in approximately 15 minutes, making it well suited for maintenance and facility coating work where downtime matters. At 9.09 pounds per gallon, it applies by brush or roller with minimal drag and even laydown. It protects surfaces exposed to mild to moderate corrosive environments, indoors or outdoors.

This coating is intended for direct-to-metal applications on structural steel, equipment, machinery, and other metal surfaces in commercial, industrial, and institutional settings. It meets USDA requirements for incidental food contact and is accepted for use in federally registered Canadian food facilities, making it appropriate for food processing and commercial kitchen environments. It is applied by painting contractors, maintenance technicians, and facility managers. Application conditions should be between 50 and 100 degrees F with relative humidity below 95 percent.

Key Features

• Direct-to-metal formula — no primer required for good adhesion and one-coat coverage
• 15-minute dry time reduces project downtime
• Excellent corrosion resistance with a two-year rust-proof guarantee
• Water-based formula with low brush drag and even roller application
• Meets USDA incidental food contact requirements; accepted in federally registered Canadian food facilities
• Suitable for mild to moderate indoor and outdoor corrosive environments

Compatibility

Designed for direct-to-metal application on bare or previously painted metal surfaces in indoor and outdoor mild to moderate environments. Available in one-gallon and five-gallon sizes.

Installation Notes

Surface preparation is critical — remove loose rust, grease, oil, and dirt before application. Apply only when ambient and surface temperatures are between 50 and 100 degrees F and relative humidity is below 95 percent. Stir thoroughly before use and between coats. Clean tools with water immediately after use.

Technical Specifications

• Finish: Satin
• Base: Light Base
Formula: Water-Based DTM Acrylic Enamel
• Dry Time: 15 minutes
• Application Method: Brush or Roller
• Application Temperature Range: 50 to 100 degrees F
• Maximum Relative Humidity: 95 percent
• Container Size: 1 gallon
• Weight: 9.09 pounds
• UPC: 020066430894

Standard Information

• Brand: RUST-OLEUM
• Manufacturer Part Number: 340652