Rust-oleum 314409 Acrylic Enamel Paint 1 Gal Safety Yellow

Product Description

The RUST-OLEUM 314409 is a water-based acrylic enamel paint formulated for direct-to-metal application in both indoor and outdoor environments. It delivers a gloss finish in Safety Yellow and covers 150 to 270 square feet per gallon depending on surface porosity and application method. With a VOC content of 2.08 pounds per gallon, it meets common low-VOC project requirements. Cleanup requires only soap and water. Licensed painters, maintenance technicians, and facility professionals use this coating on metal equipment, structural components, safety markings, and industrial surfaces where color visibility and durability matter.

This paint is suited for metal surfaces in commercial, industrial, and residential maintenance applications. Safety Yellow is a standard high-visibility color used on equipment guards, warehouse floors, safety barriers, and mechanical enclosures. It performs within an application temperature range of 50 degrees F minimum to 100 degrees F maximum, making it appropriate for controlled shop environments as well as outdoor maintenance work in moderate conditions. The 1-gallon container size is practical for single-trade or small-crew jobs.

Key Features

• Direct-to-metal formula — no primer required on properly prepared metal surfaces
• Coverage of 150 to 270 square feet per gallon depending on surface condition
• Water-based composition with 2.08 VOC for easier cleanup and lower emissions
• Gloss finish in Safety Yellow for high-visibility marking and equipment coating
• Rated for indoor and outdoor use within 50 to 100 degrees F application range
• Soap-and-water cleanup simplifies job site cleanup procedures

Compatibility

Designed for direct application to metal surfaces in both indoor and outdoor settings, consistent with standard acrylic enamel use on equipment, structural steel, and safety-marked components.

Installation Notes

Surface preparation is critical — remove rust, loose scale, grease, and contaminants before application. Apply only when ambient and surface temperatures are between 50 and 100 degrees F and humidity conditions allow proper film formation. Follow all local VOC regulations and ventilation requirements when applying in enclosed spaces. Do not apply to surfaces subject to prolonged immersion or direct flame exposure unless the product is rated for those conditions.