Rust-oleum 314389 Acrylic Enamel Paint 1 Gal Gloss White

Product Description

The RUST-OLEUM 314389 is a water-based acrylic enamel paint formulated for direct-to-metal application in both interior and exterior environments. It delivers a gloss white finish with a coverage rate of 150 to 270 square feet per gallon, depending on surface porosity and application method. The low-VOC formula at 2.08 grams per liter makes it suitable for use in areas where air quality and regulatory compliance are a consideration. Cleanup requires only soap and water. This paint is used by contractors, maintenance technicians, and facility professionals who need a durable, fast-cleanup metal coating without a primer step on properly prepared surfaces.

The 314389 is suited for metal surfaces in residential and commercial maintenance applications. Its indoor and outdoor rating makes it a practical choice for structural steel, equipment housings, railings, ductwork exteriors, and similar metal substrates. Application should occur when ambient and surface temperatures are between 50 and 100 degrees F to ensure proper adhesion and film formation. The one-gallon can format is appropriate for single-job use or as a stocked shop supply for recurring touch-up and recoat work.

Key Features

• Direct-to-metal formula eliminates the need for a separate primer on properly prepared surfaces
• Coverage rate of 150 to 270 square feet per gallon
• Low-VOC formulation at 2.08 grams per liter
• Gloss white finish suitable for both indoor and outdoor metal surfaces
• Water-based composition with soap-and-water cleanup
• One-gallon can for single-job or stocked supply use

Compatibility

Designed for application on metal substrates in both indoor and outdoor settings, including structural, equipment, and maintenance painting applications where a direct-to-metal acrylic enamel is specified.

Installation Notes

Surface preparation is critical — remove rust, loose scale, grease, and contaminants before application. Apply only when surface and ambient temperatures are between 50 and 100 degrees F. Follow local VOC regulations and ventilation requirements for the application environment. This product is intended for application by qualified painting contractors or maintenance personnel familiar with metal coating procedures.