Rust-oleum 282600 Epoxy Maintenance Coating 1 Gal Satin

Product Description

The RUST-OLEUM 282600 is a water-based, two-component epoxy maintenance coating in a satin finish, part of the Sierra S60/S62 system. It provides a tough, durable film designed to withstand frequent wash-downs, moisture exposure, and the demanding conditions found in food processing, manufacturing, and industrial facilities. The formula carries low VOCs, low HAPs, and low solvent odor, making it suitable for occupied or ventilated interior environments. This is a tint base product that requires a separate activator to complete the two-component system. The coating weighs 6.8 pounds per unit and is sold by the gallon.

The 282600 is intended for interior industrial and commercial surfaces that require both chemical resistance and cleanability, including walls, floors, and equipment areas in food processing plants, institutional kitchens, breweries, pharmaceutical facilities, and similar wash-down environments. It meets USDA requirements for incidental food contact and is accepted for use in federally registered Canadian food facilities. For best results, apply over an S70 or S71 primer. The satin finish identifies this product as part of the Sierra S62 system designation.

Key Features

• Two-component water-based epoxy system — tint base ordered separately from activator
• Satin finish; part of the Sierra S62 system designation
• Low VOCs, low HAPs, and low solvent odor for use in occupied facilities
• Dries to touch in 30 minutes; return to service in 24 hours
• Impervious to moisture; surface can be cleaned and sanitized
• Meets USDA incidental food contact requirements; accepted in federally registered Canadian food facilities

Compatibility

Designed for use as part of the Rust-Oleum Sierra S60/S62 water-based epoxy system; recommended for application over Rust-Oleum S70 or S71 primer for maximum adhesion and performance.

Installation Notes

Application should be performed by a qualified painter or coating contractor familiar with two-component epoxy systems. Mix the tint base and activator according to the manufacturer's instructions before application — do not apply either component alone. Ensure adequate ventilation during application and curing. Allow the full 24-hour cure before returning the surface to service or exposing it to wash-down conditions.

Technical Specifications

• Finish: Satin
• Formula Type: Water-Based Epoxy
• System: Two-Component (tint base and activator ordered separately)
• Dry Time (Touch): 30 minutes
• Return to Service: 24 hours
• Container Size: 1 gallon
• Weight: 6.8 pounds
• VOC Content: Low
• UPC: 020066267704

Standard Information

• Brand: RUST-OLEUM
• Manufacturer Part Number: 282600