Rust-oleum 257401V Enamel Spray Paint Emerald Green Gloss

Product Description

The RUST-OLEUM 257401V is a gloss enamel aerosol spray paint formulated for durable, hard-finish coverage on a wide range of surfaces. This solvent-based formula delivers a vibrant Emerald Green color with a gloss sheen suited for both interior and exterior applications. Each 12 oz aerosol can covers 15 to 25 square feet depending on surface porosity and application technique. Touch dry time is 10 hours, with full dry achieved at 60 hours. Designed for use on metal, wood, concrete, and masonry, this product suits general maintenance, repair, and light industrial coating work performed by facility techs, contractors, and experienced tradespeople.

This spray paint is rated for indoor and outdoor use across a wide range of conditions. It is appropriate for residential and light commercial projects including equipment touch-up, structural component coating, and surface restoration. The 50 to 100 degrees F application temperature range makes it suitable for most temperate job site conditions. Surfaces such as steel pipe, wood trim, poured concrete, and concrete block are all within the intended application scope.

Key Features

• Gloss finish in Emerald Green for high-visibility or decorative coating applications
• Solvent-based enamel formula bonds to metal, wood, concrete, and masonry
• Coverage of 15 to 25 square feet per 12 oz can
• Touch dry in 10 hours; fully cured at 60 hours
• Application temperature range of 50 to 100 degrees F
• Aerosol can format requires no additional spray equipment

Compatibility

Designed for use on metal, wood, concrete, and masonry surfaces in both interior and exterior environments. Suitable for indoor and outdoor projects where a solvent-based enamel finish is required.

Installation Notes

Surface preparation is critical — clean the substrate thoroughly and remove loose rust, grease, oil, and old flaking coatings before applying. Shake the can well before use and apply in a controlled, sweeping motion at the distance specified on the product label. Do not apply when ambient or surface temperatures fall outside the 50 to 100 degrees F range, or when rain or high humidity is expected within the cure window. Use in a well-ventilated area and follow all applicable safety data sheet guidance for solvent-based aerosols.