Rust-oleum 245533 Alkyd Enamel Paint Flat White

Product Description

The RUST-OLEUM 245533 is a flat white alkyd enamel paint formulated for both indoor and outdoor applications. It bonds directly to metal surfaces without a separate primer, making it a practical choice for structural steel, equipment housings, tanks, and other metal substrates. The formula delivers coverage of 230 to 425 square feet per gallon depending on surface porosity and application method. VOC content is 340 g/L. Tack-free dry time is 4 hours, full cure is reached at 8 hours, and recoat windows open at 24 hours. This product is handled and applied by painting contractors, maintenance crews, and facilities technicians working on metal surfaces in commercial and industrial environments.

The 245533 is suited for direct-to-metal use on both interior and exterior surfaces. Typical applications include structural steel, mechanical equipment enclosures, railings, gates, and similar metal components exposed to moderate environmental conditions. The flat finish reduces light reflection, which is useful in utility and industrial settings. Application is rated for ambient temperatures between 32 degrees F and 100 degrees F. This large-format 1,280 fl oz can is appropriate for high-volume jobs where multiple surfaces or large surface areas are being coated in a single session.

Key Features

• Direct-to-metal formula eliminates the need for a separate primer coat
• Coverage of 230 to 425 square feet per gallon depending on surface condition
• Flat white finish suitable for utility and industrial environments
• Tack-free in 4 hours, fully dry in 8 hours
• Rated for application between 32 degrees F and 100 degrees F
• Large 1,280 fl oz container size reduces the need for frequent refills on large jobs

Compatibility

Designed for direct-to-metal application on interior and exterior metal surfaces including structural steel, equipment enclosures, and similar substrates. Confirm surface preparation requirements and topcoat compatibility with the project specification before application.

Installation Notes

Surface preparation is critical for adhesion — remove loose rust, mill scale, grease, and dirt before applying. Application should only proceed when ambient and surface temperatures are between 32 degrees F and 100 degrees F. Allow the full 24-hour recoat window before applying additional coats. Follow local VOC regulations and applicable safety data sheet guidance for ventilation and personal protective equipment, particularly in enclosed spaces.