Russound ic-620t In-ceiling Stereo Speaker 5-100W

Product Description

The RUSSOUND ic-620t is a round in-ceiling stereo speaker designed to deliver both left and right audio channels through a single enclosure. It combines dual 0.75-inch tweeters with a 6.5-inch polypropylene cone mid/bass driver to cover a frequency response of 40 Hz to 20 kHz. Rated for 5 to 100 watts at 8 ohms with a sensitivity of 91 dB, it suits a wide range of residential amplifier and receiver outputs. The SwiftLock tool-less installation system speeds up rough-in and trim-out, reducing labor time on multi-room audio installations.

The ic-620t is suited for residential in-ceiling audio distribution in living rooms, bedrooms, hallways, and similar interior spaces. Its stereo-input design allows a single speaker to reproduce a full stereo mix, making it a practical choice where running separate left and right speakers is not feasible. The round form factor fits standard ceiling cutouts and works with typical low-voltage audio wiring runs from a central distribution amplifier or receiver.

Key Features

• Stereo-input design plays both left and right channels through one ceiling enclosure
• Dual 0.75-inch tweeters paired with a 6.5-inch polypropylene cone mid/bass driver
• Wide power handling of 5 to 100 watts accommodates low- and high-output sources
• 91 dB sensitivity for efficient output at moderate amplifier power
• SwiftLock tool-less installation system for fast, bracket-free ceiling mounting
• Limited Lifetime warranty on both parts and labor

Compatibility

Designed as an in-ceiling stereo speaker for residential low-voltage audio distribution systems; compatible with amplifiers and receivers outputting 5 to 100 watts into an 8-ohm load.

Installation Notes

Installation is typically performed by a low-voltage audio or custom integration technician. Power down or switch off the amplifier or receiver before making any speaker wire connections. The SwiftLock system eliminates the need for separate dog-ear brackets, but verify ceiling material thickness is within the mounting depth of 4 inches before cutting. Follow local building codes regarding in-wall and in-ceiling wiring, including CL2 or CL3 wire ratings where required.