Rubber t22005001 Pvc Fuel Line Hose 3/16 in Id 150 Ft

Product Description

The RUBBER t22005001 is a reinforced PVC fuel line hose designed for general-purpose petroleum-based fluid transfer. Supplied on a 150-foot bulk spool, it features a 3/16-inch inner diameter and a 3/8-inch outer diameter. The hose is rated for working pressures between 175 and 250 psi and handles a temperature range of -40 degrees F to 150 degrees F. It is oil and grease resistant, making it a practical choice for low-pressure fuel line runs in a wide range of service and maintenance applications. This hose is not intended for under-hood or high-heat engine compartment use.

This fuel hose is suited for residential and light commercial applications where petroleum-based product transfer is required outside of under-hood environments. Typical uses include fuel line runs to small engines, generators, outdoor power equipment, and stationary tanks. The 150-foot bulk spool allows service technicians and installers to cut custom lengths on the job, reducing waste and simplifying inventory. It is installed by plumbers, equipment technicians, and general service professionals working with low-pressure fuel delivery systems.

Key Features

• Reinforced PVC construction with oil and grease resistance for petroleum-based fluid compatibility
• 3/16-inch ID and 3/8-inch OD for standard small-bore fuel line fitment
• Working pressure range of 175 to 250 psi for low-pressure fuel system service
• Temperature rated from -40 degrees F to 150 degrees F
• 150-foot bulk spool allows field cutting to required lengths
• Not rated for under-hood or high-temperature engine compartment installations

Compatibility

Designed for general-purpose fuel line applications involving petroleum-based products, including gasoline, diesel, and oil in low-pressure, non-under-hood service environments.

Installation Notes

Installation should be performed by a qualified technician familiar with low-pressure fuel system work and applicable local codes. Shut off the fuel supply and relieve system pressure before cutting or connecting hose. Use appropriate hose clamps rated for fuel service at the connections. This hose must not be routed through high-heat zones, engine compartments, or areas exceeding its 150 degrees F temperature rating.

Technical Specifications

• Inside Diameter: 3/16 inches
• Outside Diameter: 3/8 inches
• Length: 150 feet
• Pressure Rating: 175 to 250 psi
• Temperature Range: -40 degrees F to 150 degrees F
• Material: Reinforced PVC
• Product Weight: 4.9 pounds
• Country of Origin: US

Standard Information

• Brand: RUBBER
• Manufacturer Part Number: t22005001