Royal Building Products 35-1602 Pvc SDR35 Street 45 Elbow 4 in

Product Description

The ROYAL BUILDING PRODUCTS 35-1602 is a 4-inch PVC SDR35 gasketed street 45-degree elbow designed for gravity-flow sewer and drain piping systems. This fitting accepts a spigot on one end and a gasketed bell on the other, allowing it to connect directly into a hub without a separate coupling. The SDR35 wall thickness rating makes it suitable for standard residential and commercial gravity sewer applications. Plumbers and pipefitters install this elbow when a 45-degree change of direction is required in buried or above-grade sanitary sewer lines.

This fitting is used in residential and commercial sewer lateral installations, municipal gravity sewer mains, and storm drainage systems where PVC SDR35 pipe is specified. The gasketed joint provides a watertight, root-resistant seal without solvent cement, which is standard practice for buried sewer pipe assemblies. It is a common choice on new construction and repair projects that must meet local plumbing code requirements for sewer-grade PVC fittings.

Key Features

• 4-inch diameter PVC SDR35 construction rated for gravity sewer service
• Street configuration with spigot inlet and gasketed bell outlet for direct hub insertion
• 45-degree deflection angle for moderate directional changes in sewer runs
• Gasket-sealed joint eliminates solvent cement on the bell end for faster field assembly
• Compatible with standard SDR35 and SDR26 gasketed PVC sewer pipe systems

Compatibility

Designed as an OEM-style replacement and standard-stock fitting for 4-inch PVC SDR35 gasketed sewer piping systems. Cross-reference part numbers G404, 429410, and 443404 may apply to equivalent fittings from other suppliers.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) or applicable local sewer and drain codes. Ensure the pipe spigot and gasket seat are clean and lubricated with an approved gasket lubricant before assembly. Verify trench bedding and backfill requirements per project specifications to prevent deflection or joint separation after burial. Do not exceed the manufacturer-rated deflection angle at the joint during installation.

Technical Specifications

• Pipe Size: 4 inches
• Material: PVC
• Pipe Standard: SDR35
• Fitting Type: Street 45-Degree Elbow
• Joint Type: Gasketed Bell x Spigot
• UPC: 089938000733

Standard Information

• Brand: ROYAL BUILDING PRODUCTS
• Manufacturer Part Number: 35-1602