Royal Building Products 35-1504 Pvc SDR35 Wye 8x6

Product Description

The Royal Building Products 35-1504 is a PVC SDR35 gasketed wye fitting sized for 8-inch by 6-inch pipe connections. Designed for gravity-flow sewer and drain applications, this wye fitting allows a 6-inch branch line to tie into an 8-inch main line at a standard wye angle. The SDR35 wall thickness rating makes it appropriate for underground sewer installations where soil loading and burial depth are factors. Licensed plumbers and sewer contractors install this fitting in residential and commercial gravity sewer systems. The gasketed (GSK) end connections provide a reliable, watertight seal without solvent cement, speeding up field assembly.

This fitting is used in underground gravity sewer and drain systems, typically installed below grade in trenched excavations. It suits residential sewer laterals, commercial site drainage, and municipal-grade sewer collection lines where SDR35 PVC pipe is the specified material. The 8-inch by 6-inch reduction configuration is common when tying a building sewer lateral or secondary drain line into a larger main. Installation is performed by licensed plumbers or sewer contractors following applicable plumbing and drainage codes.

Key Features

• SDR35 PVC construction rated for gravity-flow sewer and drain service
• Gasketed (GSK) joints for solvent-free, watertight field assembly
• 8-inch main by 6-inch branch configuration for lateral tie-in applications
• Suitable for underground burial in residential and commercial sewer installations
• Conforms to SDR35 dimensional standards widely specified in sewer system design

Compatibility

Designed as an OEM-style replacement and new-construction fitting compatible with SDR35 PVC sewer pipe in 8-inch and 6-inch diameters using gasketed joint connections.

Installation Notes

Installation is performed by a licensed plumber or sewer contractor in accordance with the International Plumbing Code (IPC) or applicable local sewer codes. Excavate and bed the trench to the required depth and bedding material specified by the design drawings before setting the fitting. Lubricate gaskets with an approved pipe lubricant and fully seat all spigot ends into the gasket sockets to achieve a proper seal. Do not use solvent cement on gasketed SDR35 joints; doing so can damage the gasket and compromise the connection.