Romex romex10/3w/grd250c Nm-b 10/3 Awg Cable 250 Ft

Product Description

The ROMEX romex10/3w/grd250c is a 10 AWG, 3-conductor NM-B non-metallic sheathed branch circuit cable with ground, supplied in a 250-foot coil. Rated for 600 volts and 30 amps, this solid copper cable carries a 90 degrees C temperature rating for use in dry, indoor residential and light commercial wiring applications. The PVC insulation and nylon jacket provide durability and resistance to abrasion during installation. Licensed electricians install this cable for branch circuit runs in walls, floors, and ceilings where NM-B cable is permitted by local code.

This cable is suited for residential branch circuit wiring applications including dryer circuits, water heater feeds, and other 30-amp dedicated circuits. It is installed in dry or damp locations within normally occupied structures. The 250-foot coil length accommodates longer runs typical in new construction and remodel work without the need for mid-run splices.

Key Features

• 10 AWG solid copper conductors rated for 30 amps at 600 volts
• 3-conductor configuration with ground wire included
• 90 degrees C temperature rating for NM-B applications
• PVC insulation with nylon outer jacket for abrasion resistance
• 250-foot coil minimizes splices on longer branch circuit runs
• NM-B type listing suitable for dry and damp indoor locations per NEC

Compatibility

Designed as a standard NM-B branch circuit cable for use in residential and light commercial wiring systems where Type NM-B cable is permitted by the National Electrical Code.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. Always de-energize the circuit and verify zero voltage at the panel before pulling or terminating cable. NM-B cable is restricted to dry or damp indoor locations and must not be used in conduit, exposed outdoor runs, or in wet locations. Protect cable from physical damage where it passes through framing with appropriate nail plates.

Technical Specifications

• Type: NM-B
• Conductor Material: Copper
• Conductor Size: 10 AWG
• Number of Conductors: 3 with Ground
• Stranding: Solid
• Current Rating: 30 amps
• Voltage Rating: 600 volts
• Temperature Rating: 90 degrees C
• Insulation Material: PVC
• Jacket Material: Nylon
• Outer Diameter: 0.422 inches
• Length: 250 feet
• Weight: 41 pounds (per 250-foot coil)

Standard Information

• Brand: ROMEX
• Manufacturer Part Number: romex10/3w/grd250c