Robert Bosch Tool Group NKLT06 Long Auger Bit 3/8 in

Product Description

The ROBERT BOSCH TOOL GROUP NKLT06 is a long auger bit engineered for boring through wood in applications where nails, screws, or other embedded fasteners are likely to be encountered. Part of the Daredevil NailKiller line, this bit measures 3/8 inch in diameter with a 17.5 inch overall length and a 13.5 inch flute length. The 1/4 inch shank fits standard hex-drive chuck systems. Dual cutting edges balance the drilling load while tackling nails, and the open-faced flute design promotes continuous chip evacuation to reduce bind-up during deep boring passes.

This auger bit is suited for residential and light commercial rough-in work where electricians, plumbers, and HVAC technicians need to bore through framing, joists, or existing walls that may contain hidden nails or staples. It is particularly useful during retrofit and remodel installations where older framing presents unpredictable nail patterns. The reinforced tip and reamer edge produce cleaner entry and exit holes, reducing the need for cleanup work on each pass.

Key Features

• Dual cutting edges deliver balanced drilling and easier nail cutting in a single pass
• Reinforced tip rated for repeated nail strikes, providing up to 9 times longer life compared to standard auger bits when hitting nails
• Open-faced flute design improves chip removal and reduces heat buildup during deep boring
• Reamer edge improves entry and exit hole quality for cleaner rough-in work
• 1/4 inch hex shank is compatible with standard hex-drive and quick-change chuck systems
• 17.5 inch overall length with a 13.5 inch flute gives reach for deep boring through thick framing assemblies

Compatibility

Designed for use in wood framing and structural lumber applications where nail contact is expected. Fits drills and right-angle drives equipped with a 1/4 inch hex chuck or quick-change adapter.

Installation Notes

This bit is installed by electricians, plumbers, and HVAC technicians performing rough-in boring through wood framing. Confirm the drill or right-angle drive accepts a 1/4 inch hex shank before use. Maintain steady, controlled feed pressure when the bit contacts a nail to avoid deflection or bit damage. Follow applicable codes such as NEC or IPC for minimum clearance requirements when boring near structural members.