Robbjack C20-0468-16-24 Slitting Saw 2in 24T Carbide

Product Description

The ROBBJACK C20-0468-16-24 is a solid carbide slitting and slotting saw designed for precise, narrow-kerf cutting in ferrous and non-ferrous materials. At 2 inches in diameter and 0.0468 inches thick, this saw produces tight slot widths with minimal material waste. The 24-tooth straight configuration combined with a 10-degree rake angle promotes clean chip evacuation and controlled cut geometry. The bright uncoated finish leaves the carbide substrate exposed for direct heat dissipation, making it well suited for softer materials where coating buildup would reduce dimensional accuracy. Machinists and toolroom operators working with production or prototype applications will find this saw well matched to their arbor-mounted setups.

This saw is engineered for arbor-mount use on milling machines, rotary tables, and horizontal mill setups. Its right-hand cutting direction and concave-ground body reduce side wall contact during slotting passes. Suitable material applications include aluminum, brass, copper, magnesium, composites, and plastics. It is appropriate for both production shop environments and precision toolroom work where consistent slot width and surface finish are required.

Key Features

• Solid carbide construction for rigidity and wear resistance in non-ferrous and composite materials
• 0.0468-inch blade thickness for narrow-kerf slitting and precision slotting
• 24 straight teeth with a 10-degree rake angle for clean chip flow and controlled cutting action
• Concave-ground blade body minimizes side wall friction during deep slot passes
• Right-hand cutting direction compatible with standard arbor-mount spindle configurations
• Bright uncoated finish maintains close dimensional tolerances on soft and gummy workpiece materials

Compatibility

Designed for arbor-mount milling applications in Series C configuration. Compatible material applications include aluminum, brass, copper, magnesium, composites, and plastics as specified by the manufacturer.

Installation Notes

Installation requires a suitable arbor and draw bar setup on a horizontal or vertical milling machine. Ensure the spindle is fully stopped and the machine is locked out before mounting or removing the saw blade. Verify arbor diameter, spacer stack, and clamping nut torque per machine and arbor manufacturer specifications before beginning any cut. Do not exceed the recommended surface footage for the workpiece material, and inspect the blade for chipping or runout before each use.