Rivetking /XCM375010SY/P100 Semi Tubular Rivet 100pk

Product Description

The RIVETKING /XCM375010SY/P100 is a countersunk head semi tubular rivet designed for fastening applications where a flush or recessed finish is required on the mating surface. Constructed from zinc plated steel, this rivet offers corrosion resistance suitable for light industrial and mechanical assembly work. The body diameter measures 9/64 inches with a head diameter of 3/8 inches and a length under head of 5/16 inches. The countersunk head angle is 150 degrees, allowing the head to seat flush when installed into a properly prepared countersunk hole. This fastener is used by trade professionals and assemblers in panel, bracket, and light structural joining tasks.

This rivet is suited for applications requiring a hole diameter between 0.1 and 0.107 inches, making it appropriate for thin-gauge steel, aluminum, and similar substrates commonly found in HVAC enclosures, electrical panels, and light mechanical assemblies. The zinc plated finish provides a baseline level of corrosion protection for indoor or sheltered environments. Sold in a pack of 100 units, this SKU is well-suited for service technicians and shop environments that require consistent inventory of small fasteners for assembly or field repair work.

Key Features

• Countersunk head at 150 degrees for flush seating in countersunk holes
• Zinc plated steel construction for corrosion resistance in indoor environments
• Body diameter of 9/64 inches fits holes from 0.1 to 0.107 inches
• Head diameter of 3/8 inches provides adequate bearing surface
• Length under head of 5/16 inches suitable for thin-gauge material joining
• Packed in quantities of 100 for shop and field use

Compatibility

Designed as an OEM-style semi tubular rivet for use in light assembly and panel fastening applications requiring a countersunk head profile and a hole diameter range of 0.1 to 0.107 inches.

Installation Notes

Semi tubular rivets are typically set using a rivet press or hand rivet setting tool matched to the correct die for the head style and body diameter. Ensure the receiving hole is properly countersunk at the appropriate angle before installation to allow full head seating. Verify material thickness is compatible with the 5/16 inch length under head before setting. Follow applicable assembly standards for the application; do not overdrive the rivet, as this can crack the head or distort the substrate.