Rivetking SBS854CMSETP10 Blind Rivet 8-54 Dome Steel 10pk

Product Description

The RIVETKING SBS854CMSETP10 is a flush-on-both-sides blind rivet designed for applications where a smooth, low-profile surface is required on the accessible and blind sides of the joint. Built with a steel body and steel mandrel, this size 8-54 dome head rivet delivers consistent clamping force across a grip range of 3.125 to 3.375 inches. The 0.25-inch body diameter and 0.625-inch head diameter make it suitable for structural and sheet metal fastening tasks. Sold in a 10-piece package, it is commonly installed by sheet metal workers, fabricators, and maintenance technicians working on light structural assemblies.

This rivet is suited for residential and commercial applications where both sides of the fastened material are visible and a flush finish is required on each face. Typical install scenarios include HVAC ductwork fabrication, metal panel assembly, equipment enclosures, and general sheet metal repair. The flush head profile prevents interference with adjacent surfaces or mating components. A minimum hole diameter of 0.255 inches is required for proper installation.

Key Features

• Flush profile on both the accessible side and the blind side for clean two-sided finishes
• Steel body and steel mandrel for reliable pull strength in metal-to-metal fastening
• Dome head style with a 0.625-inch head diameter and 0.1-inch head height
• Size 8-54 with a grip range of 3.125 to 3.375 inches to accommodate varying material stack thicknesses
• Body diameter of 0.25 inches requiring a minimum hole diameter of 0.255 inches
• Sold in a 10-piece package for small-quantity service and repair use

Compatibility

Designed as an OEM-style replacement and general-purpose blind rivet for applications requiring a flush finish on both sides, compatible with any standard blind rivet tool accepting a 0.25-inch body diameter rivet.

Installation Notes

Installation requires a standard manual or pneumatic blind rivet tool sized for a 0.25-inch rivet body. Drill or punch the mating hole to a minimum diameter of 0.255 inches before insertion. Ensure all fastened materials are fully seated and clamped before pulling the mandrel. Discard spent mandrel stems safely and inspect the set head on the blind side where accessible to confirm full flush seating.