Rivetking /SBS822CM/SET/P10 Blind Rivet 8-22 Dome Steel 10pk

Product Description

The RIVETKING /SBS822CM/SET/P10 is a flush-on-both-sides blind rivet designed for applications where a smooth surface finish is required on the accessible and blind sides of the joint. Built with a steel body and steel mandrel, this size 8-22 rivet features a dome head profile and a body diameter of 0.25 inches. It accommodates a grip range of 1.125 to 1.375 inches and requires a minimum hole diameter of 0.255 inches. The length under the head measures 1.07 inches. This fastener is installed by licensed tradespeople and fabricators working in structural, mechanical, and sheet-metal assembly applications.

This blind rivet is suited for steel-to-steel and mixed-material fastening tasks where access is limited to one side of the assembly. The flush-on-both-sides design makes it appropriate for panels, enclosures, HVAC ductwork components, electrical enclosures, and similar assemblies where protrusion on the blind side is not acceptable. The dome head provides a low-profile finished appearance on the accessible face. Each package contains 10 rivets with a minimum order quantity of 1 package.

Key Features

• Flush finish on both accessible and blind sides - no protrusion on the back face
• Steel body and steel mandrel for durable, all-steel fastening in demanding assemblies
• Size 8-22 with a body diameter of 0.25 inches fits a 0.255-inch minimum hole diameter
• Grip range of 1.125 to 1.375 inches accommodates varying material stack thicknesses
• Dome head profile with a head diameter of 0.625 inches and head height of 0.1 inches
• Packaged in quantities of 10 per set for convenient jobsite use

Compatibility

Designed as an OEM-style replacement or direct-use fastener for applications requiring size 8-22 flush blind rivets with a 0.25-inch body diameter in steel construction assemblies.

Installation Notes

Installation requires a blind rivet tool sized for a 0.25-inch body diameter. Verify the drilled or punched hole diameter meets the 0.255-inch minimum before setting the rivet. Ensure both mating surfaces are clean and properly aligned before pulling the mandrel. Dispose of spent mandrels safely and inspect the set rivet head on both sides to confirm a flush, fully seated condition.