Rivetking. SBS62/P250 Open End Blind Rivet 250 Pack

Product Description

The RIVETKING. SBS62/P250 is a Size 62 open end blind rivet designed for permanent fastening applications where access is limited to one side of the workpiece. The rivet features a dome head profile with a 3/8-inch head diameter and a 3/16-inch body diameter, suitable for hole diameters ranging from 0.192 to 0.196 inches. The steel body is paired with a phosphate-finished steel mandrel, delivering a tensile strength of 680 pounds and a shear strength of 540 pounds. This rivet meets IFI 114 Grade 30 standards and is installed using a standard blind rivet pull tool. Each package contains 250 rivets.

This rivet is suited for light structural and general fabrication tasks in residential, commercial, and industrial settings. The open end design allows for standard mandrel pull installation without requiring rear access. Typical applications include sheet metal assembly, HVAC ductwork, enclosures, brackets, and light mechanical assemblies. The grip range of 0.02 to 0.125 inches accommodates thin to moderate material stack-ups. Installation requires a No. 11 drill bit for proper hole preparation.

Key Features

• Open end blind rivet design for single-side installation access
• Dome head profile with 3/8-inch head diameter and 0.060-inch head height
• Steel body with phosphate-finished steel mandrel for corrosion resistance on the mandrel surface
• Tensile strength of 680 pounds and shear strength of 540 pounds
• Meets IFI 114 Grade 30 fastener standard
• Package quantity of 250 rivets with a minimum order quantity of 1

Compatibility

Designed for use in material stack-ups with a grip range of 0.020 to 0.125 inches and hole diameters of 0.192 to 0.196 inches, consistent with No. 11 drill size preparation. Suitable as an OEM-style or replacement Size 62 open end blind rivet in sheet metal, HVAC, and general fabrication applications.

Installation Notes

Installation is performed using a standard hand or pneumatic blind rivet pull tool sized for 3/16-inch body rivets. Drill the mounting hole to the appropriate diameter using a No. 11 bit before inserting the rivet. Ensure the material stack falls within the 0.020 to 0.125-inch grip range to achieve proper mandrel break and head-set. Follow applicable worksite safety practices and de-energize any nearby electrical systems before fastening near live panels or conduit.