Rivetking SBS41/P500 Blind Rivet Size 41 Dome Head 500 Pack

Product Description

The RIVETKING SBS41/P500 is a Size 41 open end blind rivet with a dome head, steel body, and steel mandrel, sold in a 500-piece package. The body diameter is 0.125 inches and the head diameter is 0.25 inches. Grip range spans 0.02 to 0.062 inches, making this rivet suited for thin-material fastening applications. The mandrel carries a phosphate finish for corrosion resistance in service. Tensile strength is rated at 310 pounds and shear strength at 260 pounds, meeting IFI 114 Grade 30 standards. Installation requires a No. 30 drill for proper hole sizing. These rivets are installed by tradespeople, fabricators, and mechanical contractors working with sheet metal, enclosures, brackets, and structural panels.

Open end blind rivets in Size 41 are commonly used in HVAC ductwork fabrication, electrical enclosure assembly, sheet metal work, and general mechanical fastening where one-sided access is the only option. The 500-piece pack quantity suits production shops, service fleets, and contractors who install these fasteners in volume. Minimum hole diameter is 0.129 inches and maximum hole diameter is 0.133 inches, consistent with a No. 30 drill. The dome head profile sits flush to low-profile against the work surface, distributing load across a 0.25-inch head diameter.

Key Features

• Open end design allows standard single-sided blind installation with a conventional rivet gun
• Steel body and steel mandrel provide structural integrity rated to 310 pounds tensile and 260 pounds shear
• Phosphate-finished mandrel resists corrosion and oxidation in service
• Grip range of 0.02 to 0.062 inches covers a variety of thin-sheet stack-up thicknesses
• Meets IFI 114 Grade 30 fastener standard for consistent quality and dimensional control
• 500-piece package quantity reduces reorder frequency for high-volume install operations

Compatibility

Designed as an OEM-style open end blind rivet for use in applications requiring a No. 30 drill hole with a body diameter of 0.125 inches and a grip range of 0.02 to 0.062 inches.

Installation Notes

A licensed sheet metal mechanic, electrician, or mechanical contractor typically installs blind rivets of this type using a standard or pneumatic rivet gun. Drill the pilot hole to the specified diameter using a No. 30 drill bit before setting the rivet. Verify material stack-up falls within the 0.02 to 0.062 inch grip range prior to installation. Do not exceed the rated tensile or shear load in structural applications without engineering review.