Rivetking ATT06-6-6/P50 Open End Blind Rivet 1/4 in Pack 50

Product Description

The RIVETKING ATT06-6-6/P50 is an open end blind rivet with a dome head profile, designed for through-hole fastening applications where access is limited to one side of the workpiece. The body and mandrel are both aluminum, making this rivet well suited for lightweight assemblies and corrosion-sensitive environments. The body diameter is 1/4 inch with a grip range of 0.187 to 0.375 inches and a length under head of 1.096 inches. This rivet is installed using a standard hand or pneumatic rivet tool and is a common choice for sheet metal fabrication, HVAC ductwork assembly, and general mechanical assembly work.

This rivet is used across residential and light commercial applications wherever a flush or low-profile dome head fastener is needed on thin to medium material stacks. Typical install scenarios include HVAC duct panels, enclosure fabrication, signage, and structural sheet metal work. The all-aluminum construction keeps weight low and avoids galvanic issues when fastening aluminum substrates. Each package contains 50 rivets, making it practical for both small repair jobs and repeat production runs.

Key Features

• Open end design allows the mandrel to pull through and lock the rivet body during installation
• Dome head profile distributes clamping load and sits low-profile on the surface
• Aluminum body and aluminum mandrel reduce weight and resist corrosion
• 1/4 inch body diameter fits standard 1/4 inch drilled or punched holes
• Grip range of 0.187 to 0.375 inches accommodates a range of material stack thicknesses
• Packaged in quantities of 50 for jobsite or production use

Compatibility

Designed for use in standard 1/4 inch diameter through-holes; compatible with hand-operated, pneumatic, and battery-powered rivet tools that accept 1/4 inch mandrel nosepieces.

Installation Notes

Installation is performed by inserting the rivet body into a pre-drilled or punched 1/4 inch hole and pulling the mandrel with an appropriate rivet tool until the mandrel stem snaps. Verify the grip range of 0.187 to 0.375 inches matches the total material stack thickness before selecting this rivet. Ensure the mating surfaces are clean and properly aligned before driving. Spent mandrel stems should be collected and disposed of safely to avoid FOD hazards in mechanical assemblies.