Rivetking /ACS42-44MG/P100 Countersunk Blind Rivet 100pk

Product Description

The RIVETKING /ACS42-44MG/P100 is an open-end blind rivet with a countersunk head, designed for flush-surface fastening in sheet metal, fabrication, and structural assembly work. The body is aluminum with a steel mandrel, offering a balance of corrosion resistance and pull strength. The body diameter is 1/8 inch, length under head is 3/8 inch, and the grip range runs from 0.074 to 0.250 inches, making it suitable for thin to medium material stacks. This rivet is installed by licensed sheet metal workers, HVAC fabricators, and general contractors using standard blind rivet tools.

This countersunk blind rivet is commonly used in applications where a flush or low-profile fastener head is required, such as HVAC ductwork panels, electrical enclosures, trailer and vehicle body fabrication, and light structural assemblies. The aluminum body keeps weight low and resists corrosion in indoor and moderate outdoor environments. The steel mandrel provides consistent pull force and reliable clinch across the stated grip range. This package contains 100 rivets, suitable for production runs or ongoing service work.

Key Features

• Countersunk head profile allows flush installation on finished surfaces
• Aluminum body resists corrosion in light-duty and indoor applications
• Steel mandrel delivers consistent pull strength across the full grip range
• Grip range of 0.074 to 0.250 inches accommodates a range of material thicknesses
• 1/8 inch body diameter is a common standard size compatible with most hand and pneumatic rivet tools
• Packaged in quantities of 100 for service efficiency

Compatibility

Designed for use with standard 1/8 inch blind rivet tools, including manual, pneumatic, and battery-powered models. Fits typical countersunk rivet applications in sheet metal, HVAC panel fabrication, and light structural assembly.

Installation Notes

Installation requires a blind rivet tool sized for 1/8 inch rivets. Drill the appropriate clearance hole per the rivet body diameter before installation. Ensure the material stack falls within the stated grip range of 0.074 to 0.250 inches for proper clinch formation. After setting, inspect the mandrel break and flush head seating before completing the assembly.