Rivetking ABS64/P500 Blind Rivet Size 64 Dome Head 500 Pack

Product Description

The RIVETKING ABS64/P500 is a size 64 open end blind rivet designed for permanent fastening in applications where only one side of the work piece is accessible. The aluminum body is grade 5056 alloy with a bright finish, and the steel mandrel features a phosphate finish for corrosion resistance. With a dome head measuring 3/8 inches in diameter and a body diameter of 3/16 inches, this rivet installs quickly using a standard hand or pneumatic rivet tool. Tensile strength is rated at 500 pounds and shear strength at 380 pounds, making it a dependable fastener for light structural and sheet metal work. Sold in a package quantity of 500.

This rivet is suited for residential and commercial assembly, HVAC ductwork fabrication, sheet metal enclosures, electrical panel assembly, and general trade maintenance work. The 0.188 to 0.250 inch grip range accommodates a range of material stack thicknesses. Installation requires a drilled or punched hole sized for a No. 11 wire gauge drill bit, which corresponds to a minimum hole diameter of 0.192 inches and a maximum of 0.196 inches. Electricians, HVAC installers, plumbers, and general contractors commonly use this rivet size in production and field repair scenarios.

Key Features

• Grade 5056 aluminum body with bright finish for lightweight, corrosion-resistant fastening
• Steel mandrel with phosphate finish for added durability during installation
• Dome head profile at 3/8 inch diameter and 0.060 inch head height provides a low-profile, finished appearance
• 500-pound tensile strength and 380-pound shear strength rated for light structural applications
• Grip range of 0.188 to 0.250 inches accommodates varied material thicknesses
• Open end design allows standard rivet tool installation from a single side

Compatibility

Designed as an OEM-compatible open end blind rivet for use in any application requiring a size 64 dome head rivet with a 3/16 inch body diameter and a No. 11 drill size hole.

Installation Notes

Installation should be performed by a qualified tradesperson using a hand-operated or pneumatic blind rivet tool rated for the mandrel diameter. Drill or punch the hole to the specified diameter range before setting the rivet. Ensure the material stack falls within the stated grip range to achieve full mandrel break and proper head flare. Inspect each set rivet for a fully seated dome head and a cleanly broken mandrel before considering the joint complete.