Rivetking /ABS62-64MG/RT/P250 Dome Head Blind Rivet 250 Pack

Product Description

The RIVETKING /ABS62-64MG/RT/P250 is a dome head blind rivet designed for fastening applications where access is limited to one side of the workpiece. The aluminum body pairs with a zinc-finished steel mandrel for a corrosion-resistant joint with reliable clamping force. At size code 62-64, this rivet covers a grip range of 0.062 to 0.250 inches and accepts a hole diameter between 0.192 and 0.196 inches. With a rated tensile strength of 486 pounds and shear strength of 331 pounds, it is well suited for structural sheet metal work, panel mounting, and mechanical assembly tasks common to HVAC, electrical, and general trade fabrication. Each package contains 250 rivets.

This rivet is used across residential and commercial trade applications including HVAC sheet metal ductwork assembly, electrical enclosure fabrication, plumbing fixture mounting, and general mechanical panel work. The dome head profile provides a low-profile finished appearance on the accessible face. Installation requires only a standard blind rivet pull tool, making it practical for field work and shop fabrication alike. The 3/16 inch body diameter and 3/8 inch head diameter are standard sizing recognized across most trade fastener catalogs.

Key Features

• Dome head profile for a clean, low-profile finish on the accessible face
• Aluminum body with zinc-finished steel mandrel for corrosion resistance
• Grip range of 0.062 to 0.250 inches accommodates varied material stack thicknesses
• Tensile strength of 486 pounds and shear strength of 331 pounds
• Body diameter of 3/16 inches fits holes drilled to wire gauge number 11
• Sold in a 250-piece package for shop stocking or field kit replenishment

Compatibility

Designed as a standard 62-64 size dome head blind rivet compatible with any manual or pneumatic blind rivet tool accepting 3/16 inch body diameter fasteners. Suitable for aluminum, sheet metal, and light structural substrates within the specified grip and hole diameter range.

Installation Notes

Installation is performed with a standard hand-operated or pneumatic blind rivet pull tool sized for 3/16 inch rivets. Drill the mating hole to between 0.192 and 0.196 inches using a wire gauge number 11 drill bit before inserting the rivet. Insert the rivet fully into the hole before actuating the tool to ensure proper mandrel break and head seating. Discard spent mandrel stems in a suitable waste container and inspect the set head for flush seating before completing the assembly.