Rivetking ABS62-64LRTP250 Blind Rivet 3/16 in 250 Pack

Product Description

The RIVETKING ABS62-64LRTP250 is a large flange head blind rivet with a size code of 62-64, an aluminum body, and a zinc-plated steel mandrel. The 3/16-inch body diameter fits holes ranging from 0.192 to 0.196 inches and accepts grip ranges from 0.062 to 0.250 inches. The wide 0.612-inch flange head distributes clamping load across a broader surface area, making this rivet well suited for softer base materials or oversized holes. Tensile strength is rated at 486 pounds and shear strength at 331 pounds. This package contains 250 rivets. Installation requires a standard blind rivet tool compatible with 3/16-inch mandrels.

This rivet is used across a range of light to medium fabrication and assembly applications, including HVAC ductwork, sheet metal enclosures, electrical panels, signage, and general manufacturing. The large flange head is particularly useful where pull-through resistance is needed in thin or soft substrates. The zinc-plated finish provides basic corrosion resistance for indoor and protected outdoor environments. Electricians, HVAC technicians, sheet metal workers, and general contractors commonly use this fastener when access to the back side of the workpiece is limited.

Key Features

• Size code 62-64 with 3/16-inch body diameter and grip range of 0.062 to 0.250 inches
• Large flange head at 0.612 inches diameter for increased load distribution and pull-through resistance
• Aluminum body with zinc-plated steel mandrel for lightweight installation and basic corrosion resistance
• Tensile strength of 486 pounds and shear strength of 331 pounds
• Recommended drill size is wire gauge number 11
• Package quantity of 250 rivets per box

Compatibility

Designed for use with standard blind rivet tools that accept 3/16-inch mandrels. Suitable for applications requiring a number 11 drill size pilot hole with a minimum hole diameter of 0.192 inches and a maximum of 0.196 inches.

Installation Notes

Drill the pilot hole to the correct diameter using a number 11 bit before inserting the rivet body. Use a blind rivet tool rated for 3/16-inch rivets and ensure the mandrel is fully seated in the tool nose before applying force. Do not exceed the specified grip range, as over- or under-length grip conditions reduce joint strength. Inspect the set rivet head and mandrel break point to confirm full flange seating against the workpiece surface.