Rivetking ABS610-612RT250 Blind Rivet Dome Head 250 Pack

Product Description

The RIVETKING ABS610-612RT250 is a dome-head blind rivet designed for one-sided fastening applications across metal fabrication, HVAC ductwork, electrical enclosures, and light structural assemblies. It features an aluminum body paired with a zinc-plated steel mandrel, delivering a balance of corrosion resistance and mechanical strength. The body diameter measures 3/16 inches, with a grip range spanning 0.500 to 0.787 inches, making it suitable for moderate-thickness material stacks. Tensile strength is rated at 486 pounds and shear strength at 331 pounds. Each package contains 250 rivets, supporting higher-volume production or service work without frequent reordering.

This rivet is used in residential and light commercial applications where access is limited to one side of the workpiece. Common install scenarios include HVAC sheet metal fabrication, electrical panel and enclosure assembly, automotive trim, and general sheet metal repair. The dome head profile sits low against the material surface, making it appropriate where a flush or near-flush appearance is required. It is installed using a standard blind rivet puller tool sized for 3/16-inch body diameter rivets. The 250-count package quantity suits both shop production and field service use.

Key Features

• Dome head profile provides a low-profile, clean finish against the workpiece surface
• Aluminum body offers lightweight construction with natural corrosion resistance
• Zinc-plated steel mandrel adds pull strength and resistance to oxidation
• 486-pound tensile strength and 331-pound shear strength for dependable joint integrity
• Grip range of 0.500 to 0.787 inches accommodates varied material stack thicknesses
• 250-piece pack quantity reduces restocking frequency on high-volume jobs

Compatibility

Designed for use in standard 0.192 to 0.196-inch diameter drilled or punched holes, compatible with any manual or pneumatic blind rivet tool accepting 3/16-inch body diameter rivets. Recommended drill size is wire gauge number 11.

Installation Notes

Blind rivets in this size range are typically installed by sheet metal workers, HVAC technicians, electricians, and general fabricators. Before installation, ensure the hole diameter falls within the 0.192 to 0.196-inch range for proper mandrel pull and head seating. Use a rivet puller rated for 3/16-inch body diameter and inspect the set rivet head to confirm full dome formation against the material surface. Discard any rivets with visibly deformed bodies or pre-broken mandrels prior to installation.