Rivetking ABS42CE/P100 Blind Rivet Size 4-2 100 Pack

Product Description

The RIVETKING ABS42CE/P100 is a closed end sealing blind rivet designed to prevent fluid, air, and debris from passing through the rivet body after installation. Built with an aluminum body and a steel mandrel, this size 4-2 rivet features a dome head profile and a body diameter of 0.125 inches. The closed end design makes it the correct choice when a sealed, liquid-resistant fastening point is required. It ships in a 100-piece package. Sheet metal workers, HVAC fabricators, plumbers, and general trade installers use this rivet where standard open-end rivets would allow leakage or contamination.

This rivet is suited for light-gauge material assemblies in residential and commercial applications where a watertight or airtight blind fastener is needed. Typical uses include ductwork panels, enclosures, equipment covers, and sheet metal assemblies where access is limited to one side of the workpiece. The grip range of 0.063 to 0.125 inches accommodates single-layer and multi-layer material stacks within that thickness window. The 100-piece quantity supports jobsite and shop use without requiring bulk ordering.

Key Features

• Closed end body seals the rivet hole against fluid and air infiltration after setting
• Aluminum body resists corrosion in light-duty environments
• Steel mandrel provides reliable pull strength during installation
• Dome head profile distributes clamping load across the material surface
• Size 4-2 with 0.063 to 0.125 inch grip range accommodates varied material stack thicknesses
• 100-piece pack quantity suits both service calls and shop fabrication tasks

Compatibility

Designed as an OEM-style sealing blind rivet for use in light-gauge sheet metal and panel assemblies requiring a closed end fastener with a 0.125 inch body diameter and a grip range of 0.063 to 0.125 inches.

Installation Notes

A standard blind rivet pulling tool sized for 0.125 inch body diameter rivets is required for installation. Verify that the combined material thickness of the workpiece falls within the 0.063 to 0.125 inch grip range before selecting this rivet. Drill the pilot hole to the correct body diameter clearance and deburr before inserting the rivet. The mandrel stem will break off flush once the rivet is fully set - inspect the set head on the blind side where accessible to confirm full flare.