Rivetking /ABS41-43LFMG/RT/P100 Blind Rivet 100 Pack

Product Description

The RIVETKING /ABS41-43LFMG/RT/P100 is an open-end blind rivet with a large flange head, designed for one-sided fastening applications where access to the back of the workpiece is not possible. The aluminum body pairs with a steel mandrel, providing a reliable mechanical lock after setting. The body diameter measures 0.125 inches, and the grip range spans 0.039 to 0.189 inches, making it suitable for a range of material stack thicknesses. The length under head is 0.328 inches. This rivet is sold in a package quantity of 100. It is typically installed by HVAC technicians, electricians, plumbers, sheet metal workers, and general trade contractors.

This rivet is used in light- to medium-duty fastening applications involving sheet metal, ductwork, electrical enclosures, equipment panels, and similar assemblies. The large flange head distributes clamping load over a wider surface area, which is useful when fastening softer substrates or thin materials that could pull through a standard-head rivet. It is well suited for residential and light commercial mechanical and electrical installations where blind fastening is required.

Key Features

• Open-end rivet design for standard one-sided installation
• Large flange head spreads clamping force across a wider bearing area
• Aluminum body with steel mandrel for reliable set strength
• Grip range: 0.039 to 0.189 inches accommodates varying material thicknesses
• Body diameter: 0.125 inches (1/8 inch nominal)
• Packaged in quantities of 100 per pack

Compatibility

Designed as a standard open-end blind rivet for use in sheet metal, ductwork, electrical enclosure, and equipment panel fastening applications requiring a 0.125-inch body diameter rivet with a large flange head.

Installation Notes

Install with a hand, pneumatic, or battery-powered blind rivet tool sized for a 0.125-inch rivet. Drill or punch the pilot hole to the appropriate diameter per the rivet manufacturer specifications before setting. Ensure all material layers are clamped flush before pulling the mandrel to avoid a loose set. Discard spent mandrels and inspect each rivet head for full flange seating after installation.