Rivetking /ABL0422/LF8/P500 Plus Blind Rivet 500pk

Product Description

The RIVETKING /ABL0422/LF8/P500 is a plus blind rivet with a dome head, aluminum body, and aluminum mandrel, sold in a package of 500. The body diameter measures 0.125 inches (1/8 inch) and the head diameter is 0.312 inches. This rivet accepts a grip range of 0.125 to 0.375 inches, making it well suited for fastening thin to moderately thick material stacks. Installation requires access from one side only, making it a practical choice for closed-section assemblies. Fabricators, sheet metal workers, and general contractors install this type of fastener regularly in light structural and enclosure applications.

This plus blind rivet is appropriate for use in residential and light commercial fabrication, HVAC ductwork, sheet metal enclosures, equipment panels, and general assembly work where a one-sided fastening solution is required. The dome head profile sits flush to low-profile above the material surface, distributing load across a 0.312-inch head diameter. The aluminum body and mandrel make this rivet suitable for applications where corrosion resistance and lightweight construction are priorities.

Key Features

• Plus blind rivet design allows single-sided installation without rear access
• Dome head with 0.312-inch head diameter and 0.060-inch head height
• Grip range of 0.125 to 0.375 inches accommodates varying material thicknesses
• Minimum hole diameter of 0.129 inches; maximum hole diameter of 0.143 inches (No. 30 drill size)
• Length under head of 0.975 inches
• Aluminum body and aluminum mandrel for lightweight, corrosion-resistant fastening
• Package quantity of 500 for production and job-site use

Compatibility

Designed for use in applications requiring a 1/8-inch body diameter plus blind rivet with a dome head. Suitable for standard rivet tools capable of accepting 1/8-inch mandrel diameters. Requires a No. 30 drill size hole for proper fit.

Installation Notes

Drill the mating hole to the specified diameter using a No. 30 drill bit before installation. Use a pneumatic or hand-operated blind rivet tool rated for 1/8-inch body rivets. Ensure material stack thickness falls within the 0.125 to 0.375-inch grip range before pulling the mandrel. Wear appropriate eye protection during installation, as the spent mandrel stem ejects upon setting.