Rivetking 10C2IKFAP/P25 Aluminum Rivet Nut 10-24 25-pack

Product Description

The RIVETKING 10C2IKFAP/P25 is an aluminum standard rivet nut with a countersunk head profile, designed to install a threaded insert into thin-panel applications without requiring access to the back side of the material. Threaded to 10-24, it accepts a grip range of 0.13 to 0.225 inches, making it suitable for a range of sheet metal, panel, and enclosure thicknesses. The uncoated aluminum body keeps weight low and resists corrosion in most indoor environments. Installation requires a 19/64-inch drill hole. Electricians, HVAC sheet metal workers, and general equipment fabricators use these inserts when a strong, removable threaded connection is needed in blind or one-sided access conditions. This pack contains 25 pieces.

These rivet nuts are used in light-gauge sheet metal panels, electrical enclosures, HVAC equipment housings, equipment cabinets, and similar assemblies where a standard machine screw thread must be added to material too thin for conventional tapping. The countersunk head seats flush with or below the panel surface, which is preferred when clearance is limited or a smooth exterior finish is required. Installers working on control panels, duct work framing, and light structural brackets will find the 10-24 thread size and aluminum construction well suited to general-purpose fastening tasks.

Key Features

• 10-24 internal thread for use with standard machine screws
• Grip range of 0.13 to 0.225 inches covers a variety of light-gauge panel thicknesses
• Countersunk head profile sits flush with the panel surface
• Aluminum construction provides a lightweight, corrosion-resistant insert
• Uncoated finish - no coating to crack or chip under installation torque
• Requires a 19/64-inch drill hole for proper seating
• Sold in a convenient 25-piece pack

Compatibility

Designed as a standard 10-24 countersunk rivet nut for installation into thin sheet metal and panel assemblies where a blind threaded insert is required.

Installation Notes

Drill a clean 19/64-inch hole in the base material before insertion. Use a rivet nut setting tool - either manual or pneumatic - sized for the 10-24 thread to achieve proper mandrel pull and flange set. Verify grip range against actual material thickness before installation, as under- or over-grip will compromise holding strength. De-energize and lock out any equipment panel before performing fastener installation work on live assemblies.