Raindrip Inc 157010B Full Circle Stream Spray Bubbler 10 Pack

Product Description

The RAINDRIP INC 157010B is a full circle stream spray bubbler designed for low-volume drip and micro-irrigation systems. Each bubbler delivers a 360-degree spray pattern with a flow rate adjustable from 0 to 20 GPH at 30 PSI, making it well suited for watering shrubs, ground cover, and small planting areas where controlled, targeted water delivery is required. The 1/4-inch barbed inlet connects directly to standard 1/4-inch drip irrigation tubing. Sold in a 10-pack, this unit is a practical choice for irrigation contractors and landscape professionals installing or servicing residential or light commercial drip systems.

This bubbler is appropriate for use in residential and commercial landscape irrigation zones where surface-level, low-pressure water distribution is the goal. The adjustable flow rate allows the installer to balance output across a zone without adding additional pressure-compensating hardware. Typical applications include garden beds, planters, and tree rings fed by a mainline drip system. At 30 PSI operating pressure, the maximum spray diameter reaches 3 feet, providing adequate coverage for individual plants or closely spaced plantings.

Key Features

• Full circle 360-degree stream spray pattern for uniform coverage
• Adjustable flow rate from 0 to 20 GPH at 30 PSI
• Maximum spray diameter of 3 feet at 30 PSI
• 1/4-inch barbed inlet for direct connection to standard drip tubing
• Sold as a 10-pack for multi-emitter zone installations

Compatibility

Designed as an OEM-style replacement or new-installation emitter compatible with standard 1/4-inch drip irrigation distribution tubing used in residential and commercial landscape irrigation systems.

Installation Notes

Installation is typically performed by licensed irrigation contractors or experienced landscape technicians. Shut off the irrigation zone valve and relieve system pressure before inserting or removing barbed emitters from tubing. A barb insertion tool is recommended to seat the fitting fully without splitting the tubing. Verify operating pressure at the zone header does not exceed the rated 30 PSI to maintain accurate flow rates across all emitters in the zone.