Rainbird National Sls 12SAPROPR Mini Rotor Prs Spray Head

Product Description

The RAINBIRD NATIONAL SLS 12SAPROPR is an adjustable mini rotor sprinkler head with a built-in pressure regulating spray (PRS) system, designed for residential and commercial irrigation installations. The head adjusts from 45 to 270 degrees and throws water across a 13 to 18 foot radius using multiple rotating streams that distribute water uniformly across the coverage arc. The 4-inch pop-up height uses a 1800 Pro Series body with a 1/2-inch inlet. The integrated pressure regulation eliminates misting and fogging at elevated operating pressures, improving distribution uniformity and reducing evaporative loss. Licensed irrigation contractors and landscape professionals install this head in turf and groundcover zones.

This mini rotor is suited for residential and light commercial turf zones where mixed-head zoning is required. Because it operates at matched precipitation rates compatible with full-size rotors, it may be installed in the same zone as large rotor heads without causing over- or under-watering in portions of the zone. The adjustable arc and regulated output make it appropriate for irregularly shaped turf areas, parkway strips, and slopes where runoff control is a priority. Pressure regulating heads of this type are required by code in California, Washington, Hawaii, Colorado, and Vermont.

Key Features

• Adjustable arc from 45 to 270 degrees covers irregular turf shapes
• 13 to 18 foot throw radius suits medium-sized turf zones
• Integrated PRS eliminates misting and fogging at high inlet pressures
• 4-inch pop-up height on 1800 Pro Series body
• 1/2-inch inlet for standard lateral pipe connection
• Compatible in mixed-head zones alongside full-size rotors
• Meets pressure-regulating head requirements in CA, WA, HI, CO, and VT

Compatibility

Designed for use in standard 1/2-inch threaded irrigation lateral systems. May be installed in the same zone as large rotor heads. Required by code in California, Washington, Hawaii, Colorado, and Vermont for applicable irrigation applications.

Installation Notes

Installation should be performed by a licensed irrigator or qualified landscape contractor in accordance with local plumbing and irrigation codes. Shut off the irrigation water supply and depressurize the lateral line before installing or replacing any head. Set arc adjustment before backfilling to avoid disturbing the installed position. Do not overtighten the inlet fitting on the 1/2-inch threaded connection, as cracking the body will void the head seal.