Rain Bird X49111 Xfs-cv Dripline 0.6 Gph 18 in 250 Ft

Product Description

The RAIN BIRD X49111 is a 16mm subsurface or surface dripline designed for precise, low-volume irrigation in landscaping, agriculture, and turf applications. Emitters are factory-installed at 18-inch spacing and rated at 0.6 gallons per hour, delivering consistent flow along the entire run. The XFS-CV series includes a check valve built into each emitter, which holds water in the line after the irrigation cycle ends and prevents low-head drainage on sloped terrain. Licensed irrigation contractors and landscape professionals install this product as part of drip zone assemblies controlled by a standard irrigation timer or controller.

This dripline is suited for residential and commercial landscape beds, vegetable gardens, row crops, and slopes where uniform water distribution is critical. The 250-foot roll provides enough coverage for moderate to large drip zones. The 16mm diameter is compatible with standard fittings and barbed connectors used in low-volume drip systems. Applications include mulched shrub beds, ground cover plantings, and any zone where overhead spray is undesirable or restricted.

Key Features

• Factory-installed emitters at 18-inch spacing eliminate field spacing guesswork
• 0.6 GPH per emitter supports low-precipitation-rate irrigation requirements
• Built-in check valve in each emitter prevents low-head drainage after shutoff
• 16mm tubing diameter works with widely available drip system fittings and connectors
• 250-foot roll length suits large landscape zones with a single continuous run

Compatibility

Designed as an OEM-style dripline for use in 16mm low-volume drip irrigation systems with standard barbed fittings, compression fittings, and drip zone manifolds typical of residential and commercial landscape installations.

Installation Notes

Installation is performed by licensed irrigation contractors or qualified landscape professionals. Turn off the irrigation system and relieve line pressure before cutting or connecting tubing. Secure the dripline with tubing stakes at regular intervals to prevent movement, and use a punch tool sized for 16mm barbed fittings when inserting emitter supply lines or connectors. Flush the system before capping the end to clear any debris introduced during installation.

Technical Specifications

• Emitter Flow Rate: 0.6 GPH
• Emitter Spacing: 18 inches
• Tubing Diameter: 16mm
• Roll Length: 250 feet
• Check Valve: Yes, integrated per emitter
• Weight: 9.4 pounds
• UPC: 739460026762

Standard Information

• Brand: RAIN BIRD
• Manufacturer Part Number: X49111