Pro-source TUR2404PGRE Cat5e Ethernet Cable 24 Awg 1000 Ft

Product Description

The PRO-SOURCE TUR2404PGRE is a Cat5e unshielded twisted-pair (UTP) Ethernet cable designed for structured wiring installations in commercial and residential environments. Constructed with 24 AWG conductors and polyolefin insulation, this cable supports standard 10/100/1000 Mbps network applications over runs up to the Cat5e specification limit. The green jacket aids in color-coded cable management, making it easier to identify network runs during installation and future service work. This spool ships as a 1,000-foot bulk roll, suited for installers pulling cable through walls, conduit, and cable trays on larger jobs.

This bulk Cat5e cable is appropriate for low-voltage network cabling projects in office buildings, light commercial spaces, schools, and residential new construction or retrofit work. It is commonly used to terminate into keystone jacks, patch panels, and field-terminated RJ45 connectors. The unshielded construction is standard for most indoor structured cabling applications where electromagnetic interference is not a primary concern. Low-voltage electricians and network installers are the typical trades pulling and terminating this cable type.

Key Features

• Cat5e specification supports Gigabit Ethernet over standard structured cabling distances
• 24 AWG conductor size meets TIA-568 wiring standard requirements
• Polyolefin insulation provides reliable electrical performance and durability
• Unshielded construction simplifies termination and is compatible with standard UTP hardware
• Green jacket supports color-coded cable management in multi-run installations
• 1,000-foot bulk spool reduces waste and cost on large pulls

Compatibility

Designed as a standard Cat5e UTP bulk cable compatible with RJ45 keystone jacks, patch panels, and field-termination connectors meeting the TIA-568 Cat5e wiring standard.

Installation Notes

Installation should be performed by a licensed low-voltage electrician or qualified network cabling technician in accordance with TIA-568 and applicable local codes. De-energize any adjacent circuits before pulling cable through occupied pathways or enclosures. Avoid sharp bends below the minimum bend radius and do not exceed the cable's pulling tension rating during installation. Terminate with 568A or 568B wiring schemes consistently throughout the run to maintain signal integrity.